Scales from mobile devices to high-end PCs. The engine is lightweight and typically capped at 60 FPS. It requires a stable internet connection for asset streaming and a DX10 compatible GPU.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 329 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 256 FPS. At 4K, all settings exceed 234 FPS.
The GeForce RTX 4090 is 843% above the recommended GPU (GeForce GTX 660) for Roblox. The EPYC 9565 is 6072% above the recommended CPU (Core 2 Duo).
The GeForce RTX 4090 sets the FPS ceiling at all 1080p settings, 1440p (medium/high), all 4k settings, while the EPYC 9565 still has additional frame-generation headroom. The FPS ceiling is closely matched at 1440p (low/ultra).
Approximated average price on current market:
Combo price: $9882. At 1080p Ultra, this combo delivers 329 FPS, equivalent to 0.03 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.053 fps/$ | 0.055 fps/$ | 0.051 fps/$ | 0.033 fps/$ |
| 1440p | 0.034 fps/$ | 0.035 fps/$ | 0.039 fps/$ | 0.026 fps/$ |
| 4k | 0.028 fps/$ | 0.030 fps/$ | 0.035 fps/$ | 0.024 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p high, the GeForce RTX 4090 sets the ceiling at about 345 FPS, while the EPYC 9565 has headroom up to 500 FPS. In this scenario, the GPU limits the CPU potential by 31% (FPS gap: 155 FPS). Overall distribution: GPU limits 10/12 cells, CPU limits 0/12, balanced 2/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the EPYC 9565 frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 18% | GPU Limits CPU 26% | GPU Limits CPU 31% | GPU Limits CPU 20% |
| 1440p (2K QHD) | Balanced | GPU Limits CPU 6% | GPU Limits CPU 19% | Balanced |
| 4K (Ultra HD) | GPU Limits CPU 9% | GPU Limits CPU 16% | GPU Limits CPU 23% | GPU Limits CPU 8% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU10% - 20% <> GPU6% - 19% <> | CPU10% - 20% <> GPU6% - 20% <> | CPU10% - 21% <> GPU8% - 23% <> | CPU6% - 20% <> GPU5% - 22% <> |
| 1440p (2K QHD) | CPU10% - 20% <> GPU6% - 20% <> | CPU10% - 20% <> GPU6% - 21% <> | CPU10% - 21% <> GPU9% - 24% <> | CPU6% - 20% <> GPU6% - 23% <> |
| 4K (Ultra HD) | CPU11% - 20% <> GPU9% - 29% <> | CPU10% - 19% <> GPU10% - 30% <> | CPU11% - 21% <> GPU13% - 33% <> | CPU6% - 20% <> GPU12% - 32% <> |
The EPYC 9565 + GeForce RTX 4090 pairing runs this title with CPU utilization between 6% and 21% and GPU utilization between 5% and 33%. EPYC 9565 keeps significant headroom across presets, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 14% at 1080p to 21% at 4K, while CPU averages move from 15% to 15%.
Neither component is close to saturation: CPU tops out at 21% and GPU at 33%. This pattern suggests possible engine-side limits, an FPS cap, or workload constraints unrelated to raw hardware throughput. It also shows why low utilization does not automatically mean there is no FPS limiter.
At 1080p, averages sit around CPU 15% and GPU 14%. At 1440p, that shifts to CPU 15% and GPU 14%, and at 4K it reaches CPU 15% and GPU 21%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
4K (Ultra HD) High is the most balanced preset based on this dataset. It runs around CPU 16% (11-21%) and GPU 23% (13-33%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while EPYC 9565 remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the EPYC 9565 and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 6072% above and your GPU is 843% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+6072%vsrecommended
+843%vsrecommended
+4407%vsminimum
+2422%vsminimum
Yes, the EPYC 9565 paired with the GeForce RTX 4090 can run Roblox smoothly up to 4k achieving around 234 FPS at Ultra quality. Your GPU is 843% above the recommended specs, and your CPU is 6072% above the recommended requirements.
This CPU + GPU combo costs approximately $9882 ($8233 CPU (Rank #450 Value) + $1649 GPU (Rank #77 Value)). Your GeForce RTX 4090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Roblox performance right now. GPU fully utilized at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p medium, 1440p high, 4k low, 4k medium, 4k high, 4k ultra.
Roblox does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Roblox requires at minimum a Celeron D (CPU) and GeForce 6600 (GPU) with 1 GB RAM and 20 MB storage. For the recommended experience, you need a Core 2 Duo and GeForce GTX 660 with 4 GB RAM. Your EPYC 9565 and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Roblox FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
