The Java version is inefficient and single-thread bound, often bottlenecking on the CPU unless you use performance mods. The Bedrock edition is optimized in C++ and runs much better. For Java, the CPU is king.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 304 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 265 FPS. At 4K, all settings exceed 172 FPS.
The GeForce RTX 4090 is 1907% above the recommended GPU (GeForce 700 Series) for Minecraft. The EPYC 9655 is 2696% above the recommended CPU (Core i5-4690).
The GeForce RTX 4090 sets the FPS ceiling at all 1080p settings, all 1440p settings, 4k (medium/high/ultra), while the EPYC 9655 still has additional frame-generation headroom. The FPS ceiling is closely matched at 4k low.
Approximated average price on current market:
Combo price: $13501. At 1080p Ultra, this combo delivers 304 FPS, equivalent to 0.02 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.052 fps/$ | 0.044 fps/$ | 0.035 fps/$ | 0.023 fps/$ |
| 1440p | 0.052 fps/$ | 0.041 fps/$ | 0.031 fps/$ | 0.020 fps/$ |
| 4k | 0.037 fps/$ | 0.031 fps/$ | 0.022 fps/$ | 0.013 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p high, the GeForce RTX 4090 sets the ceiling at about 275 FPS, while the EPYC 9655 has headroom up to 500 FPS. In this scenario, the GPU limits the CPU potential by 45% (FPS gap: 225 FPS). Overall distribution: GPU limits 11/12 cells, CPU limits 0/12, balanced 1/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the EPYC 9655 frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 11% | GPU Limits CPU 29% | GPU Limits CPU 45% | GPU Limits CPU 45% |
| 1440p (2K QHD) | GPU Limits CPU 19% | GPU Limits CPU 34% | GPU Limits CPU 43% | GPU Limits CPU 37% |
| 4K (Ultra HD) | Balanced | GPU Limits CPU 9% | GPU Limits CPU 14% | GPU Limits CPU 7% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU7% - 27% <> GPU32% - 83% <> | CPU7% - 27% <> GPU32% - 83% <> | CPU12% - 30% <> GPU34% - 87% <> | CPU12% - 31% <> GPU93% - 100% <> |
| 1440p (2K QHD) | CPU7% - 28% <> GPU32% - 83% <> | CPU7% - 28% <> GPU32% - 83% <> | CPU12% - 31% <> GPU34% - 86% <> | CPU12% - 31% <> GPU91% - 100% <> |
| 4K (Ultra HD) | CPU5% - 28% <> GPU32% - 83% <> | CPU5% - 28% <> GPU32% - 83% <> | CPU9% - 31% <> GPU34% - 86% <> | CPU10% - 31% <> GPU92% - 100% <> |
The EPYC 9655 + GeForce RTX 4090 pairing runs this title with CPU utilization between 5% and 31% and GPU utilization between 32% and 100%. EPYC 9655 keeps significant headroom across presets, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 68% at 1080p to 68% at 4K, while CPU averages move from 19% to 18%.
From a utilization perspective, this is a GPU-heavy load profile. At 1080p (Full HD) Ultra, the GeForce RTX 4090 averages 96% usage (93-100%), while the EPYC 9655 stays at 22% (12-31%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 19% and GPU 68%. At 1440p, that shifts to CPU 20% and GPU 68%, and at 4K it reaches CPU 18% and GPU 68%. This shows that workload scaling is limited, which can indicate engine-side constraints.
1080p (Full HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 22% (12-31%) and GPU 96% (93-100%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while EPYC 9655 remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The GeForce RTX 4090 reaches 96% average load at 1080p (Full HD) Ultra while the EPYC 9655 still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 2696% above and your GPU is 1907% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+2696%vsrecommended
+1907%vsrecommended
+4757%vsminimum
+39600%vsminimum
Yes, the EPYC 9655 paired with the GeForce RTX 4090 can run Minecraft smoothly up to 4k achieving around 172 FPS at Ultra quality. Your GPU is 1907% above the recommended specs, and your CPU is 2696% above the recommended requirements.
This CPU + GPU combo costs approximately $13501 ($11852 CPU (Rank #443 Value) + $1649 GPU (Rank #77 Value)). Your GeForce RTX 4090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Minecraft performance right now. GPU fully utilized at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k medium, 4k high, 4k ultra.
Minecraft does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Minecraft requires at minimum a Core i3-3210 (CPU) and GeForce 400 Series (GPU) with 2 GB RAM and 1 GB storage. For the recommended experience, you need a Core i5-4690 and GeForce 700 Series with 4 GB RAM. Your EPYC 9655 and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Minecraft FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
