ValorantFPS onEPYC 9845&GeForce RTX 4090

Valorant

Riot Games designed Valorant to run on a wide range of hardware by heavily modifying Unreal Engine 4. The game is intentionally CPU-bound to ensure competitive integrity, prioritizing visual clarity over heavy effects. However, Windows 11 users should note the TPM 2.0 and Secure Boot requirements for the Vanguard anti-cheat, which necessitates relatively modern hardware (Intel 8th Gen / Ryzen 2000 or newer) despite the game's low graphical demands. For those aiming for a stable 360 FPS, high CPU clock speeds and low-latency RAM are key.

Valorant - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low700 FPS
medium600 FPS
high500 FPS
ultra450 FPS
1440P
low700 FPS
medium600 FPS
high500 FPS
ultra450 FPS
4K
low498 FPS
medium432 FPS
high380 FPS
ultra322 FPS

Performance Report

Valorant

GeForce RTX 4090 + EPYC 9845
🎮Visual Experience

At 1080p, all quality settings exceed 450 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 450 FPS. At 4K, all settings exceed 322 FPS.

Official Requirements

The GeForce RTX 4090 is 500% above the recommended GPU (GeForce GTX 1050 Ti) for Valorant. The EPYC 9845 is 2288% above the recommended CPU (Core i3-4150).

⚙️Bottleneck Analysis

At lower resolutions (all 4k settings), the EPYC 9845 determines the performance ceiling. As graphical load increases at (1440p low), the GeForce RTX 4090 takes over as the primary performance factor. The system is well balanced at all 1080p settings, 1440p (medium/high/ultra).

💰Value Analysis

Approximated average price on current market:

GeForce RTX 4090:$1649(updated 2/6/2026)
Official Launch Price: $1599
EPYC 9845:$8670(updated 2/11/2026)
Official Launch Price: $13564

Combo price: $10319. At 1080p Ultra, this combo delivers 450 FPS, equivalent to 0.04 FPS per dollar.

ResolutionLowMediumHighUltra
1080p0.068 fps/$0.058 fps/$0.048 fps/$0.044 fps/$
1440p0.068 fps/$0.058 fps/$0.048 fps/$0.044 fps/$
4k0.048 fps/$0.042 fps/$0.037 fps/$0.031 fps/$

* Table values represent FPS per Dollar (higher is better)

Performance Limiter Analysis

EPYC 9845|GeForce RTX 4090
📈Analysis

At 4k high, the EPYC 9845 sets the ceiling at about 380 FPS, while the GeForce RTX 4090 could reach 455 FPS. In this scenario, the CPU limits the GPU potential by 16% (FPS gap: 75 FPS). Overall distribution: CPU limits 4/12 cells, GPU limits 1/12, balanced 7/12.

Verdict

Well Balanced

The EPYC 9845 and GeForce RTX 4090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.

🧩Detailed Breakdown
1080p (Full HD)
LowBalanced
MediumBalanced
HighBalanced
UltraBalanced
1440p (2K QHD)
LowGPU Limits CPU 7%
MediumBalanced
HighBalanced
UltraBalanced
4K (Ultra HD)
LowCPU Limits GPU 7%
MediumCPU Limits GPU 12%
HighCPU Limits GPU 16%
UltraCPU Limits GPU 16%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for EPYC 9845 and GeForce RTX 4090

1080p (Full HD)

Low
CPU32% - 58%
<>
GPU25% - 33%
<>
Medium
CPU32% - 58%
<>
GPU25% - 33%
<>
High
CPU31% - 57%
<>
GPU26% - 45%
<>
Ultra
CPU52% - 61%
<>
GPU29% - 47%
<>

1440p (2K QHD)

Low
CPU33% - 59%
<>
GPU31% - 33%
<>
Medium
CPU33% - 59%
<>
GPU31% - 33%
<>
High
CPU34% - 60%
<>
GPU32% - 46%
<>
Ultra
CPU52% - 61%
<>
GPU28% - 43%
<>

4K (Ultra HD)

Low
CPU30% - 37%
<>
GPU31% - 31%
Medium
CPU30% - 37%
<>
GPU31% - 31%
High
CPU31% - 37%
<>
GPU32% - 43%
<>
Ultra
CPU38% - 49%
<>
GPU28% - 41%
<>

Performance Summary

The EPYC 9845 + GeForce RTX 4090 pairing runs this title with CPU utilization between 30% and 61% and GPU utilization between 25% and 47%. EPYC 9845 keeps significant headroom across presets, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 33% at 1080p to 34% at 4K, while CPU averages move from 48% to 37%.

Bottleneck Analysis

The utilization pattern is relatively balanced. The GeForce RTX 4090 reaches 39% average at its highest-load preset, while the EPYC 9845 peaks at 56% average, with no single component consistently acting as a hard bottleneck.

Resolution Scaling

At 1080p, averages sit around CPU 48% and GPU 33%. At 1440p, that shifts to CPU 49% and GPU 35%, and at 4K it reaches CPU 37% and GPU 34%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.

Optimal Settings Recommendation

1440p (2K QHD) High is the most balanced preset based on this dataset. It runs around CPU 47% (34-60%) and GPU 39% (32-46%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while EPYC 9845 remains stable for consistent frame delivery.

Upgrade Insight

Current utilization does not show an urgent upgrade requirement for either component; the EPYC 9845 and GeForce RTX 4090 remain reasonably matched for this title.

Understanding Hardware Utilization & Bottlenecks: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. This is the key to identifying performance bottlenecks in any system.

  • The Ideal Scenario (GPU Bottleneck): You typically want to see High GPU Utilization (90%+) and moderate CPU usage. This indicates your system is successfully pushing out graphics as fast as it can, without being held back by the CPU.
  • CPU Bottleneck: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the CPU is struggling to compute game logic and prepare frames fast enough. The GPU sits waiting, often resulting in stuttering, inconsistent frame times, and lower overall FPS.
  • Engine Limits or Capped FPS: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

Valorant Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - EPYC 9845
cpu icon
152,985
Your Score
MinimumCore 2 Duo E8400
RecommendedCore i3-4150
GPU - GeForce RTX 4090
gpu icon
38,112
Your Score
MinimumGeForce GT 730
RecommendedGeForce GTX 1050 Ti

Your CPU is 2288% above and your GPU is 500% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.

CPU

+2288%vsrecommended

GPU

+500%vsrecommended

CPU

+3627%vsminimum

GPU

+2484%vsminimum

Minimum Requirements
Video Card: GeForce GT 730
Processor: Core 2 Duo E8400
Memory: 4 GB
Disk Space: 23 GB
System: Windows 10 64-bit
Recommended Requirements
Processor: Core i3-4150
Memory: 8 GB
Disk Space: 23 GB (SSD)
System: Windows 11 64-bit

Frequently Asked Questions

1Can the EPYC 9845 and GeForce RTX 4090 run Valorant well?

Yes, the EPYC 9845 paired with the GeForce RTX 4090 can run Valorant smoothly up to 4k achieving around 322 FPS at Ultra quality. Your GPU is 500% above the recommended specs, and your CPU is 2288% above the recommended requirements.

2Is there a more cost-effective setup to run Valorant?

This CPU + GPU combo costs approximately $10319 ($8670 CPU (Rank #472 Value) + $1649 GPU (Rank #77 Value)). Your EPYC 9845 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end processor with a significantly better value rating. For example, the Ryzen Threadripper PRO 9995WX is a great upgrade option for around $11699 (Rank #418 for value).

3Which component should I upgrade first to improve Valorant performance?

Your EPYC 9845 is already an incredibly powerful processor. While it's technically the first component to hit its limit (which is completely normal in state-of-the-art builds), there is no meaningful upgrade path that would drastically improve your Valorant performance right now. CPU fully utilized at: 4k low, 4k medium, 4k high, 4k ultra. GPU fully utilized at: 1440p low.

4Does this setup support Frame Generation for Valorant?

Valorant does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Valorant?

Valorant requires at minimum a Core 2 Duo E8400 (CPU) and GeForce GT 730 (GPU) with 4 GB RAM and 23 GB storage. For the recommended experience, you need a Core i3-4150 and GeForce GTX 1050 Ti with 8 GB RAM. Your EPYC 9845 and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.

6How accurate are these Valorant FPS estimates for the EPYC 9845 and GeForce RTX 4090?

These Valorant FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.