A dense RPG where Act 3 becomes a CPU stress test due to the high number of NPCs. An SSD is vital for loading times. 16GB of RAM is recommended, and the game benefits greatly from upscaling tech like DLSS and FSR.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 98 FPS. At 1440p, all settings exceed 86 FPS. At 4K, all settings exceed 60 FPS.
The GeForce RTX 4090 is 131% above the recommended GPU (GeForce RTX 2060 Super) for Baldur's Gate 3. The FX-8120 is 63% below recommended, but 11% above minimum.
The FX-8120 sets the FPS ceiling at all 1080p settings, 1440p (low/ultra), while the GeForce RTX 4090 still has headroom. The FPS ceiling is closely matched at 1440p (medium/high), all 4k settings.
Approximated average price on current market:
Combo price: $1689. At 1080p Ultra, this combo delivers 98 FPS, equivalent to 0.06 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.098 fps/$ | 0.093 fps/$ | 0.075 fps/$ | 0.058 fps/$ |
| 1440p | 0.087 fps/$ | 0.080 fps/$ | 0.064 fps/$ | 0.051 fps/$ |
| 4k | 0.061 fps/$ | 0.057 fps/$ | 0.047 fps/$ | 0.036 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p ultra, the FX-8120 sets the ceiling at about 100 FPS, while the GeForce RTX 4090 could reach 174 FPS. In this scenario, the CPU limits the GPU potential by 43% (FPS gap: 74 FPS). Overall distribution: CPU limits 6/12 cells, GPU limits 0/12, balanced 6/12.
Your FX-8120 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 40% | CPU Limits GPU 34% | CPU Limits GPU 36% | CPU Limits GPU 43% |
| 1440p (2K QHD) | CPU Limits GPU 6% | Balanced | Balanced | CPU Limits GPU 19% |
| 4K (Ultra HD) | Balanced | Balanced | Balanced | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU92% - 100% <> GPU25% - 87% <> | CPU90% - 100% <> GPU28% - 85% <> | CPU90% - 100% <> GPU34% - 89% <> | CPU93% - 100% <> GPU39% - 92% <> |
| 1440p (2K QHD) | CPU91% - 100% <> GPU34% - 89% <> | CPU89% - 100% <> GPU38% - 87% <> | CPU89% - 100% <> GPU43% - 92% <> | CPU92% - 100% <> GPU48% - 92% <> |
| 4K (Ultra HD) | CPU91% - 100% <> GPU78% - 91% <> | CPU89% - 100% <> GPU81% - 89% <> | CPU89% - 100% <> GPU81% - 96% <> | CPU92% - 99% <> GPU81% - 95% <> |
The FX-8120 + GeForce RTX 4090 pairing runs this title with CPU utilization between 89% and 100% and GPU utilization between 25% and 96%. FX-8120 reaches high load in heavier scenarios, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 60% at 1080p to 86% at 4K, while CPU averages move from 96% to 95%.
From a utilization perspective, this is a CPU-heavy load profile. At 1080p (Full HD) Low, the FX-8120 reaches 96% average load (92-100%), while the GeForce RTX 4090 remains comparatively lower at 56% (25-87%). This points to heavier CPU-side frame preparation work, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 96% and GPU 60%. At 1440p, that shifts to CPU 95% and GPU 66%, and at 4K it reaches CPU 95% and GPU 86%. This shows that GPU demand scales sharply with resolution while CPU load remains comparatively stable.
4K (Ultra HD) High is the most balanced preset based on this dataset. It runs around CPU 94% (89-100%) and GPU 88% (81-96%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while FX-8120 remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the FX-8120 and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 63% below recommended and your GPU is 131% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-63%vsrecommended
+131%vsrecommended
+11%vsminimum
+295%vsminimum
Yes, the FX-8120 paired with the GeForce RTX 4090 can run Baldur's Gate 3 smoothly up to 4k achieving around 60 FPS at Ultra quality. Your GPU is 131% above the recommended specs, and your CPU is 63% below the recommended requirements.
This CPU + GPU combo costs approximately $1689 ($40 CPU + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).
For Baldur's Gate 3, upgrading the CPU would have the biggest impact on performance. The FX-8120 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p ultra.
Baldur's Gate 3 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Baldur's Gate 3 requires at minimum a Core i5-4690 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 150 GB (SSD) storage. For the recommended experience, you need a Core i7-8700K and GeForce RTX 2060 Super with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Baldur's Gate 3 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
