Bethesda's Creation Engine 2 is CPU-dependent, especially in cities, and requires an SSD for asset streaming. Optimization tends to favor AMD slightly, but generally requires powerful hardware to run smoothly.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 79 FPS. At 1440p, all settings exceed 64 FPS. At 4K, frame rates range from 48 to 71 FPS.
The GeForce RTX 4090 is 52% above the recommended GPU (GeForce RTX 2080) for Starfield. The FX-9590 is 27% below minimum CPU requirement.
At lower resolutions (1440p low, 4k low), the FX-9590 sets the FPS ceiling. As graphical load increases at (1080p ultra), the GeForce RTX 4090 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1080p (low/medium/high), 1440p (medium/high/ultra), 4k (medium/high/ultra).
Approximated average price on current market:
Combo price: $1749. At 1080p Ultra, this combo delivers 79 FPS, equivalent to 0.05 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.073 fps/$ | 0.062 fps/$ | 0.053 fps/$ | 0.045 fps/$ |
| 1440p | 0.060 fps/$ | 0.053 fps/$ | 0.044 fps/$ | 0.037 fps/$ |
| 4k | 0.041 fps/$ | 0.038 fps/$ | 0.033 fps/$ | 0.027 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k low, the FX-9590 sets the ceiling at about 75 FPS, while the GeForce RTX 4090 could reach 88 FPS. In this scenario, the CPU limits the GPU potential by 15% (FPS gap: 13 FPS). Overall distribution: CPU limits 2/12 cells, GPU limits 3/12, balanced 7/12.
The FX-9590 and GeForce RTX 4090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | GPU Limits CPU 6% | GPU Limits CPU 7% | GPU Limits CPU 10% |
| 1440p (2K QHD) | CPU Limits GPU 11% | Balanced | Balanced | Balanced |
| 4K (Ultra HD) | CPU Limits GPU 15% | Balanced | Balanced | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU52% - 82% <> GPU59% - 81% <> | CPU47% - 79% <> GPU83% - 94% <> | CPU46% - 76% <> GPU85% - 96% <> | CPU47% - 73% <> GPU88% - 98% <> |
| 1440p (2K QHD) | CPU40% - 68% <> GPU83% - 88% <> | CPU37% - 67% <> GPU89% - 97% <> | CPU33% - 66% <> GPU92% - 99% <> | CPU29% - 57% <> GPU94% - 100% <> |
| 4K (Ultra HD) | CPU36% - 72% <> GPU83% - 91% <> | CPU35% - 71% <> GPU95% - 98% <> | CPU31% - 71% <> GPU97% - 100% <> | CPU30% - 60% <> GPU98% - 100% <> |
The FX-9590 + GeForce RTX 4090 pairing runs this title with CPU utilization between 29% and 82% and GPU utilization between 59% and 100%. FX-9590 stays in a controlled operating range, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 85% at 1080p to 95% at 4K, while CPU averages move from 63% to 51%.
From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) Ultra, the GeForce RTX 4090 averages 99% usage (98-100%), while the FX-9590 stays at 45% (30-60%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 63% and GPU 85%. At 1440p, that shifts to CPU 50% and GPU 93%, and at 4K it reaches CPU 51% and GPU 95%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) Medium is the most balanced preset based on this dataset. It runs around CPU 63% (47-79%) and GPU 88% (83-94%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while FX-9590 remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The GeForce RTX 4090 reaches 99% average load at 4K (Ultra HD) Ultra while the FX-9590 still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (27% below minimum). Expect performance issues. Low settings recommended.
-44%vsrecommended
+52%vsrecommended
-27%vsminimum
+160%vsminimum
Yes, the FX-9590 paired with the GeForce RTX 4090 can run Starfield smoothly up to 1440p achieving around 64 FPS at Ultra quality. Your GPU is 52% above the recommended specs, and your CPU is 44% below the recommended requirements.
This CPU + GPU combo costs approximately $1749 ($100 CPU + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).
For Starfield, upgrading the CPU would have the biggest impact on performance. The FX-9590 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1440p low, 4k low. GPU fully utilized at: 1080p ultra.
Starfield does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Starfield requires at minimum a Core i7-6800K (CPU) and GeForce GTX 1070 Ti (GPU) with 16 GB RAM and 125 GB (SSD Obrigatório) storage. For the recommended experience, you need a Core i5-10600K and GeForce RTX 2080 with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Starfield FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
