Returning to compete with Battlefield, Delta Force uses a modern engine featuring environmental destruction. While minimum requirements are accessible (GTX 960), competitive settings scale up to require GTX 10/RTX 20 series GPUs and 16GB of RAM for the best experience.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 62 FPS. At 1440p, all settings exceed 62 FPS. At 4K, frame rates range from 58 to 62 FPS.
The GeForce RTX 4090 is 315% above the recommended GPU (GeForce GTX 1060 5GB) for Delta Force. The FX-9800P is 41% below minimum CPU requirement.
The FX-9800P sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
Approximated average price on current market:
Combo price: $1694. At 1080p Ultra, this combo delivers 62 FPS, equivalent to 0.04 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.037 fps/$ | 0.037 fps/$ | 0.037 fps/$ | 0.037 fps/$ |
| 1440p | 0.037 fps/$ | 0.037 fps/$ | 0.037 fps/$ | 0.037 fps/$ |
| 4k | 0.037 fps/$ | 0.037 fps/$ | 0.037 fps/$ | 0.034 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p low, the FX-9800P sets the ceiling at about 62 FPS, while the GeForce RTX 4090 could reach 361 FPS. In this scenario, the CPU limits the GPU potential by 83% (FPS gap: 299 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your FX-9800P is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 83% | CPU Limits GPU 82% | CPU Limits GPU 80% | CPU Limits GPU 77% |
| 1440p (2K QHD) | CPU Limits GPU 76% | CPU Limits GPU 75% | CPU Limits GPU 72% | CPU Limits GPU 67% |
| 4K (Ultra HD) | CPU Limits GPU 62% | CPU Limits GPU 60% | CPU Limits GPU 53% | CPU Limits GPU 44% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU81% - 94% <> GPU56% - 72% <> | CPU81% - 94% <> GPU56% - 72% <> | CPU73% - 94% <> GPU60% - 76% <> | CPU77% - 94% <> GPU59% - 76% <> |
| 1440p (2K QHD) | CPU44% - 57% <> GPU89% - 94% <> | CPU44% - 57% <> GPU89% - 94% <> | CPU36% - 58% <> GPU93% - 98% <> | CPU40% - 58% <> GPU92% - 98% <> |
| 4K (Ultra HD) | CPU36% - 44% <> GPU92% - 94% <> | CPU36% - 44% <> GPU92% - 94% <> | CPU36% - 36% GPU96% - 98% <> | CPU36% - 40% <> GPU95% - 98% <> |
The FX-9800P + GeForce RTX 4090 pairing runs this title with CPU utilization between 36% and 94% and GPU utilization between 56% and 98%. FX-9800P reaches high load in heavier scenarios, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 66% at 1080p to 95% at 4K, while CPU averages move from 87% to 39%.
From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) High, the GeForce RTX 4090 averages 97% usage (96-98%), while the FX-9800P stays at 36% (36-36%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 87% and GPU 66%. At 1440p, that shifts to CPU 49% and GPU 94%, and at 4K it reaches CPU 39% and GPU 95%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1440p (2K QHD) Low is the most balanced preset based on this dataset. It runs around CPU 50% (44-57%) and GPU 92% (89-94%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while FX-9800P remains stable for consistent frame delivery.
Both components are stressed near their limits in the heaviest presets (FX-9800P: 88% avg, GeForce RTX 4090: 97% avg). A targeted upgrade should follow your target resolution: GPU first for higher image quality, CPU first for higher minimum FPS.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (41% below minimum). Expect performance issues. Low settings recommended.
-73%vsrecommended
+315%vsrecommended
-41%vsminimum
+521%vsminimum
Yes, the FX-9800P paired with the GeForce RTX 4090 can run Delta Force smoothly up to 1440p achieving around 62 FPS at Ultra quality. Your GPU is 315% above the recommended specs, and your CPU is 73% below the recommended requirements.
This CPU + GPU combo costs approximately $1694 ($45 CPU + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 7845HX is a great upgrade option (Rank #1 for value).
For Delta Force, upgrading the CPU would have the biggest impact on performance. The FX-9800P is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Delta Force does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Delta Force requires at minimum a Core i3-4150 (CPU) and GeForce GTX 960 (GPU) with 12 GB RAM and 50 GB storage. For the recommended experience, you need a Core i5-6500 and GeForce GTX 1060 5GB with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Delta Force FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
