Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, performance runs at around 9 FPS. At 1440p, performance is around 9 FPS. At 4K, frame rates range from 7 to 9 FPS.
The GeForce RTX 4090 is 183% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The Mobile Pentium 4 2.40 is 97% below minimum CPU requirement.
The Mobile Pentium 4 2.40 sets the FPS ceiling at all 1080p settings, 1440p (low/medium/high), 4k low, while the GeForce RTX 4090 still has headroom. The FPS ceiling is closely matched at 1440p ultra, 4k (medium/high/ultra).
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p low, the Mobile Pentium 4 2.40 sets the ceiling at about 9 FPS, while the GeForce RTX 4090 could reach 42 FPS. In this scenario, the CPU limits the GPU potential by 79% (FPS gap: 33 FPS). Overall distribution: CPU limits 8/12 cells, GPU limits 0/12, balanced 4/12.
Your Mobile Pentium 4 2.40 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 79% | CPU Limits GPU 73% | CPU Limits GPU 68% | CPU Limits GPU 47% |
| 1440p (2K QHD) | CPU Limits GPU 69% | CPU Limits GPU 59% | CPU Limits GPU 53% | Balanced |
| 4K (Ultra HD) | CPU Limits GPU 47% | Balanced | Balanced | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (97% below minimum). Expect performance issues. Low settings recommended.
-98%vsrecommended
+183%vsrecommended
-97%vsminimum
+521%vsminimum
The Mobile Pentium 4 2.40 and GeForce RTX 4090 will struggle to run Throne and Liberty at smooth framerates. At 1080p Ultra, you can expect around 9 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Throne and Liberty, upgrading the CPU would have the biggest impact on performance. The Mobile Pentium 4 2.40 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 4k low.
Throne and Liberty does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
