An asymmetrical horror game locked at 60 FPS. It is generally GPU-limited at high settings but runs on most mid-range hardware.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, performance runs at around 25 FPS. At 1440p, performance is around 25 FPS. At 4K, frame rates range from 22 to 25 FPS.
The GeForce RTX 4090 is 692% above the recommended GPU (GeForce GTX 760) for Dead by Daylight. The Pentium Dual-Core E2200 is 85% below minimum CPU requirement.
The Pentium Dual-Core E2200 sets the FPS ceiling at all 1080p settings, 1440p (low/medium/high), 4k low, while the GeForce RTX 4090 still has headroom. The FPS ceiling is closely matched at 1440p ultra, 4k (medium/high/ultra).
Approximated average price on current market:
Combo price: $1674. At 1080p Ultra, this combo delivers 25 FPS, equivalent to 0.01 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.015 fps/$ | 0.015 fps/$ | 0.015 fps/$ | 0.015 fps/$ |
| 1440p | 0.015 fps/$ | 0.015 fps/$ | 0.015 fps/$ | 0.015 fps/$ |
| 4k | 0.015 fps/$ | 0.015 fps/$ | 0.015 fps/$ | 0.013 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p low, the Pentium Dual-Core E2200 sets the ceiling at about 25 FPS, while the GeForce RTX 4090 could reach 88 FPS. In this scenario, the CPU limits the GPU potential by 72% (FPS gap: 63 FPS). Overall distribution: CPU limits 8/12 cells, GPU limits 0/12, balanced 4/12.
Your Pentium Dual-Core E2200 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 72% | CPU Limits GPU 59% | CPU Limits GPU 56% | CPU Limits GPU 46% |
| 1440p (2K QHD) | CPU Limits GPU 58% | CPU Limits GPU 39% | CPU Limits GPU 36% | Balanced |
| 4K (Ultra HD) | CPU Limits GPU 39% | Balanced | Balanced | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (85% below minimum). Expect performance issues. Low settings recommended.
-82%vsrecommended
+692%vsrecommended
-85%vsminimum
+1575%vsminimum
The Pentium Dual-Core E2200 and GeForce RTX 4090 will struggle to run Dead by Daylight at smooth framerates. At 1080p Ultra, you can expect around 25 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $1674 ($25 CPU + $1649 GPU). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).
For Dead by Daylight, upgrading the CPU would have the biggest impact on performance. The Pentium Dual-Core E2200 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 4k low.
Dead by Daylight does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Dead by Daylight requires at minimum a Core i3-4170 (CPU) and GeForce GTX 460 (GPU) with 8 GB RAM and 50 GB storage. For the recommended experience, you need a Core i3-4170 and GeForce GTX 760 with 8 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Dead by Daylight FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
