The Java version is inefficient and single-thread bound, often bottlenecking on the CPU unless you use performance mods. The Bedrock edition is optimized in C++ and runs much better. For Java, the CPU is king.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 56 to 70 FPS depending on quality settings. At 1440p, frame rates range from 42 to 70 FPS. At 4K, frame rates range from 25 to 70 FPS.
The GeForce RTX 4090 is 1907% above the recommended GPU (GeForce 700 Series) for Minecraft. The Pentium G4500 is 13% below minimum CPU requirement.
The Pentium G4500 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
Approximated average price on current market:
Combo price: $1683. At 1080p Ultra, this combo delivers 56 FPS, equivalent to 0.03 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.042 fps/$ | 0.042 fps/$ | 0.042 fps/$ | 0.033 fps/$ |
| 1440p | 0.042 fps/$ | 0.042 fps/$ | 0.042 fps/$ | 0.025 fps/$ |
| 4k | 0.042 fps/$ | 0.036 fps/$ | 0.026 fps/$ | 0.015 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p low, the Pentium G4500 sets the ceiling at about 70 FPS, while the GeForce RTX 4090 could reach 411 FPS. In this scenario, the CPU limits the GPU potential by 83% (FPS gap: 341 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Pentium G4500 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 83% | CPU Limits GPU 75% | CPU Limits GPU 60% | CPU Limits GPU 57% |
| 1440p (2K QHD) | CPU Limits GPU 81% | CPU Limits GPU 70% | CPU Limits GPU 53% | CPU Limits GPU 64% |
| 4K (Ultra HD) | CPU Limits GPU 75% | CPU Limits GPU 75% | CPU Limits GPU 77% | CPU Limits GPU 81% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU83% - 93% <> GPU48% - 92% <> | CPU83% - 93% <> GPU48% - 92% <> | CPU82% - 93% <> GPU48% - 92% <> | CPU83% - 94% <> GPU94% - 100% <> |
| 1440p (2K QHD) | CPU83% - 93% <> GPU48% - 92% <> | CPU83% - 93% <> GPU48% - 92% <> | CPU82% - 93% <> GPU48% - 91% <> | CPU83% - 94% <> GPU93% - 100% <> |
| 4K (Ultra HD) | CPU83% - 94% <> GPU48% - 92% <> | CPU83% - 94% <> GPU48% - 92% <> | CPU82% - 94% <> GPU48% - 91% <> | CPU82% - 94% <> GPU93% - 100% <> |
The Pentium G4500 + GeForce RTX 4090 pairing runs this title with CPU utilization between 82% and 94% and GPU utilization between 48% and 100%. Pentium G4500 reaches high load in heavier scenarios, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 77% at 1080p to 77% at 4K, while CPU averages move from 88% to 88%.
From a utilization perspective, this is a CPU-heavy load profile. At 1080p (Full HD) Low, the Pentium G4500 reaches 88% average load (83-93%), while the GeForce RTX 4090 remains comparatively lower at 70% (48-92%). This points to heavier CPU-side frame preparation work, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 88% and GPU 77%. At 1440p, that shifts to CPU 88% and GPU 77%, and at 4K it reaches CPU 88% and GPU 77%. This shows that workload scaling is limited, which can indicate engine-side constraints.
1440p (2K QHD) Ultra is the most balanced preset based on this dataset. It runs around CPU 88% (83-94%) and GPU 96% (93-100%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Pentium G4500 remains stable for consistent frame delivery.
Both components are stressed near their limits in the heaviest presets (Pentium G4500: 88% avg, GeForce RTX 4090: 97% avg). A targeted upgrade should follow your target resolution: GPU first for higher image quality, CPU first for higher minimum FPS.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (13% below minimum). Expect performance issues. Low settings recommended.
-50%vsrecommended
+1907%vsrecommended
-13%vsminimum
+39600%vsminimum
The Pentium G4500 and GeForce RTX 4090 will struggle to run Minecraft at smooth framerates. At 1080p Ultra, you can expect around 56 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $1683 ($34 CPU + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).
For Minecraft, upgrading the CPU would have the biggest impact on performance. The Pentium G4500 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Minecraft does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Minecraft requires at minimum a Core i3-3210 (CPU) and GeForce 400 Series (GPU) with 2 GB RAM and 1 GB storage. For the recommended experience, you need a Core i5-4690 and GeForce 700 Series with 4 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Minecraft FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
