1Can the PRO A6-9500E and GeForce RTX 4090 run Throne and Liberty well?
The PRO A6-9500E and GeForce RTX 4090 will struggle to run Throne and Liberty at smooth framerates.
Throne and LibertyFPS onPRO A6-9500E&GeForce RTX 4090
Throne and Liberty
Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Performance Report
Throne and Liberty
GeForce RTX 4090 + PRO A6-9500E
🎮Visual Experience
✅Official Requirements
The GeForce RTX 4090 is 183% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The PRO A6-9500E is 87% below minimum CPU requirement.
✅FPS Ceiling Analysis
No major FPS-ceiling mismatch detected. The GeForce RTX 4090 and PRO A6-9500E stay close in effective frame-generation ceiling across the tested resolutions and quality settings.
📊Predicted Hardware Utilization for PRO A6-9500E and GeForce RTX 4090
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU94% - 96% <> GPU54% - 75% <> | CPU91% - 100% <> GPU77% - 78% <> | CPU91% - 100% <> GPU77% - 78% <> | CPU72% - 82% <> GPU77% - 78% <> |
| 1440p (2K QHD) | CPU86% - 87% <> GPU54% - 75% <> | CPU75% - 90% <> GPU78% - 80% <> | CPU75% - 90% <> GPU78% - 80% <> | CPU55% - 71% <> GPU78% - 80% <> |
| 4K (Ultra HD) | CPU86% - 90% <> GPU54% - 75% <> | CPU77% - 92% <> GPU81% - 82% <> | CPU77% - 92% <> GPU81% - 82% <> | CPU59% - 83% <> GPU81% - 82% <> |
1080p (Full HD)
Low
CPU94% - 96%
<>
GPU54% - 75%
<>
Medium
CPU91% - 100%
<>
GPU77% - 78%
<>
High
CPU91% - 100%
<>
GPU77% - 78%
<>
Ultra
CPU72% - 82%
<>
GPU77% - 78%
<>
1440p (2K QHD)
Low
CPU86% - 87%
<>
GPU54% - 75%
<>
Medium
CPU75% - 90%
<>
GPU78% - 80%
<>
High
CPU75% - 90%
<>
GPU78% - 80%
<>
Ultra
CPU55% - 71%
<>
GPU78% - 80%
<>
4K (Ultra HD)
Low
CPU86% - 90%
<>
GPU54% - 75%
<>
Medium
CPU77% - 92%
<>
GPU81% - 82%
<>
High
CPU77% - 92%
<>
GPU81% - 82%
<>
Ultra
CPU59% - 83%
<>
GPU81% - 82%
<>
Performance Summary
The PRO A6-9500E + GeForce RTX 4090 pairing runs this title with CPU utilization between 55% and 100% and GPU utilization between 54% and 82%. PRO A6-9500E reaches high load in heavier scenarios, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 75% at 1080p to 78% at 4K, while CPU averages move from 91% to 82%.
Load Interpretation
The utilization pattern is relatively even. The GeForce RTX 4090 reaches 82% average at its highest-load preset, while the PRO A6-9500E peaks at 96% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
Resolution Scaling
At 1080p, averages sit around CPU 91% and GPU 75%. At 1440p, that shifts to CPU 78% and GPU 75%, and at 4K it reaches CPU 82% and GPU 78%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
Optimal Settings Recommendation
4K (Ultra HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 71% (59-83%) and GPU 82% (81-82%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while PRO A6-9500E remains stable for consistent frame delivery.
Upgrade Insight
Current utilization does not show an urgent upgrade requirement for either component; the PRO A6-9500E and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
- High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
- High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
- Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
Throne and Liberty Requirements Comparison
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
CPU - PRO A6-9500E
1,689
Your Score
MinimumCore i5-7700
RecommendedCore i5-11600K
GPU - GeForce RTX 4090
38,112
Your Score
MinimumGeForce GTX 960
RecommendedGeForce GTX 1660
Your hardware is below minimum requirements. CPU is the limiting factor (87% below minimum). Expect performance issues. Low settings recommended.
-91%vsrecommended
+183%vsrecommended
-87%vsminimum
+521%vsminimum
Minimum Requirements
Video Card: GeForce GTX 960
Processor: Core i5-7700
Memory: 16 GB
Disk Space: 63 GB
System: Windows 10 64-bit
Recommended Requirements
Video Card: GeForce GTX 1660
Processor: Core i5-11600K
Memory: 16 GB
Disk Space: 63 GB (SSD)
System: Windows 10 64-bit
Frequently Asked Questions
2Is there a more cost-effective setup to run Throne and Liberty?
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
3Which component should I upgrade first to improve Throne and Liberty performance?
This setup is already well-balanced for Throne and Liberty. No significant bottleneck - CPU and GPU are well matched across all settings. Both the PRO A6-9500E and GeForce RTX 4090 complement each other effectively, so upgrading either component individually would yield diminishing returns. If you want more FPS, you'd benefit most from upgrading both CPU and GPU together.
4Does this setup support Frame Generation for Throne and Liberty?
Throne and Liberty does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
5What are the minimum and recommended specs for Throne and Liberty?
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
6How accurate are these Throne and Liberty FPS estimates for the PRO A6-9500E and GeForce RTX 4090?
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.