This 'Pokémon with guns' survival game runs on Unreal Engine. It is CPU-heavy due to AI simulation for the many creatures. Memory leaks can occur in long sessions, making 16GB of RAM a practical minimum.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, performance runs at around 33 FPS. At 1440p, performance is around 33 FPS. At 4K, performance is around 33 FPS.
The GeForce RTX 4090 is 136% above the recommended GPU (GeForce RTX 2070) for Palworld. The Processor N50 is 83% below minimum CPU requirement.
The Processor N50 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
Approximated average price on current market:
Combo price: $1769. At 1080p Ultra, this combo delivers 33 FPS, equivalent to 0.02 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.019 fps/$ | 0.019 fps/$ | 0.019 fps/$ | 0.019 fps/$ |
| 1440p | 0.019 fps/$ | 0.019 fps/$ | 0.019 fps/$ | 0.019 fps/$ |
| 4k | 0.019 fps/$ | 0.019 fps/$ | 0.019 fps/$ | 0.019 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p low, the Processor N50 sets the ceiling at about 33 FPS, while the GeForce RTX 4090 could reach 272 FPS. In this scenario, the CPU limits the GPU potential by 88% (FPS gap: 239 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Processor N50 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 88% | CPU Limits GPU 87% | CPU Limits GPU 84% | CPU Limits GPU 82% |
| 1440p (2K QHD) | CPU Limits GPU 84% | CPU Limits GPU 84% | CPU Limits GPU 80% | CPU Limits GPU 77% |
| 4K (Ultra HD) | CPU Limits GPU 77% | CPU Limits GPU 77% | CPU Limits GPU 73% | CPU Limits GPU 63% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (83% below minimum). Expect performance issues. Low settings recommended.
-94%vsrecommended
+136%vsrecommended
-83%vsminimum
+657%vsminimum
The Processor N50 and GeForce RTX 4090 will struggle to run Palworld at smooth framerates. At 1080p Ultra, you can expect around 33 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $1769 ($120 CPU + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 7845HX is a great upgrade option (Rank #1 for value).
For Palworld, upgrading the CPU would have the biggest impact on performance. The Processor N50 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Palworld does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Palworld requires at minimum a Core i5-3570K (CPU) and GeForce GTX 1050 (GPU) with 16 GB RAM and 40 GB (SSD) storage. For the recommended experience, you need a Core i9-9900K and GeForce RTX 2070 with 32 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Palworld FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
