Built on a modified Source engine, Apex Legends retains the scalability of Titanfall 2. Fast movement demands high frame rates for fluidity. VRAM can be a bottleneck if the 'Texture Streaming Budget' is set too high. While it handles 8GB of RAM better than some competitors, 16GB is recommended. It is generally less CPU-intensive than Warzone, allowing older quad-core CPUs to remain viable.
This game has a built-in FPS cap of 300 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 189 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 197 FPS. At 4K, all settings exceed 115 FPS.
The GeForce RTX 4090 is 295% above the recommended GPU (GeForce GTX 970) for Apex Legends. The Ryzen 3 PRO 8300GE is 109% above the recommended CPU (Core i5-3570K).
The Ryzen 3 PRO 8300GE sets the FPS ceiling at all 1080p settings, 1440p (medium/high/ultra), 4k ultra, while the GeForce RTX 4090 still has headroom. The FPS ceiling is closely matched at 1440p low, 4k (low/medium/high).
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p high, the Ryzen 3 PRO 8300GE sets the ceiling at about 204 FPS, while the GeForce RTX 4090 could reach 310 FPS. In this scenario, the CPU limits the GPU potential by 34% (FPS gap: 106 FPS). Overall distribution: CPU limits 8/12 cells, GPU limits 0/12, balanced 4/12.
Your Ryzen 3 PRO 8300GE is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 20% | CPU Limits GPU 26% | CPU Limits GPU 34% | CPU Limits GPU 31% |
| 1440p (2K QHD) | Balanced | CPU Limits GPU 7% | CPU Limits GPU 15% | CPU Limits GPU 15% |
| 4K (Ultra HD) | Balanced | Balanced | Balanced | CPU Limits GPU 7% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU45% - 76% <> GPU61% - 79% <> | CPU44% - 72% <> GPU87% - 94% <> | CPU46% - 75% <> GPU87% - 97% <> | CPU43% - 72% <> GPU89% - 97% <> |
| 1440p (2K QHD) | CPU44% - 74% <> GPU62% - 79% <> | CPU43% - 70% <> GPU90% - 94% <> | CPU45% - 73% <> GPU90% - 97% <> | CPU42% - 73% <> GPU90% - 97% <> |
| 4K (Ultra HD) | CPU42% - 74% <> GPU62% - 79% <> | CPU41% - 70% <> GPU91% - 95% <> | CPU43% - 73% <> GPU91% - 97% <> | CPU40% - 73% <> GPU91% - 97% <> |
The Ryzen 3 PRO 8300GE + GeForce RTX 4090 pairing runs this title with CPU utilization between 40% and 76% and GPU utilization between 61% and 97%. Ryzen 3 PRO 8300GE stays in a controlled operating range, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 86% at 1080p to 88% at 4K, while CPU averages move from 59% to 57%.
From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) High, the GeForce RTX 4090 averages 94% usage (90-97%), while the Ryzen 3 PRO 8300GE stays at 59% (45-73%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 59% and GPU 86%. At 1440p, that shifts to CPU 58% and GPU 88%, and at 4K it reaches CPU 57% and GPU 88%. This shows that workload scaling is limited, which can indicate engine-side constraints.
1080p (Full HD) Medium is the most balanced preset based on this dataset. It runs around CPU 58% (44-72%) and GPU 90% (87-94%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Ryzen 3 PRO 8300GE remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 3 PRO 8300GE and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 109% above and your GPU is 295% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+109%vsrecommended
+295%vsrecommended
+337%vsminimum
+3160%vsminimum
Yes, the Ryzen 3 PRO 8300GE paired with the GeForce RTX 4090 can run Apex Legends smoothly up to 4k achieving around 115 FPS at Ultra quality. Your GPU is 295% above the recommended specs, and your CPU is 109% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Apex Legends, upgrading the CPU would have the biggest impact on performance. The Ryzen 3 PRO 8300GE is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p medium, 1440p high, 1440p ultra, 4k ultra.
Apex Legends does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Apex Legends requires at minimum a Core i3-6300 (CPU) and GeForce GT 640 (GPU) with 6 GB RAM and 56 GB storage. For the recommended experience, you need a Core i5-3570K and GeForce GTX 970 with 8 GB RAM. Your Ryzen 3 PRO 8300GE and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Apex Legends FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
