Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 74 FPS. At 1440p, all settings exceed 66 FPS. At 4K, frame rates range from 42 to 101 FPS.
The GeForce RTX 4090 is 183% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The Ryzen 3 PRO 8300GE is 3% below recommended, but 44% above minimum.
Throne and Liberty supports: AFMF. This game does not have native DLSS 3 or FSR 3 Frame Generation support. AFMF is AMD-exclusive and not compatible with GeForce RTX 4090.
The Ryzen 3 PRO 8300GE sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p ultra, the Ryzen 3 PRO 8300GE sets the ceiling at about 75 FPS, while the GeForce RTX 4090 could reach 160 FPS. In this scenario, the CPU limits the GPU potential by 53% (FPS gap: 85 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Ryzen 3 PRO 8300GE is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 42% | CPU Limits GPU 46% | CPU Limits GPU 43% | CPU Limits GPU 53% |
| 1440p (2K QHD) | CPU Limits GPU 34% | CPU Limits GPU 41% | CPU Limits GPU 39% | CPU Limits GPU 48% |
| 4K (Ultra HD) | CPU Limits GPU 46% | CPU Limits GPU 51% | CPU Limits GPU 45% | CPU Limits GPU 53% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 3% below recommended and your GPU is 183% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-3%vsrecommended
+183%vsrecommended
+44%vsminimum
+521%vsminimum
Yes, the Ryzen 3 PRO 8300GE paired with the GeForce RTX 4090 can run Throne and Liberty smoothly up to 1440p achieving around 66 FPS at Ultra quality. Your GPU is 183% above the recommended specs, and your CPU is 3% below the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Throne and Liberty, upgrading the CPU would have the biggest impact on performance. The Ryzen 3 PRO 8300GE is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Throne and Liberty currently only supports AFMF (AMD Fluid Motion Frames) for frame generation, which is an AMD-exclusive technology. Because you are using an NVIDIA GPU, you cannot use Frame Generation for this specific game. However, the game does support DLSS Upscaling and FSR Upscaling and XeSS, which you should enable to render at a lower resolution and use AI to significantly boost your FPS without losing visual quality.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
