Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 90 FPS. At 1440p, all settings exceed 74 FPS. At 4K, frame rates range from 47 to 79 FPS.
The GeForce RTX 4090 is 183% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The Ryzen 5 4600G is 18% below recommended, but 22% above minimum.
Throne and Liberty supports: AFMF. This game does not have native DLSS 3 or FSR 3 Frame Generation support. AFMF is AMD-exclusive and not compatible with GeForce RTX 4090.
The Ryzen 5 4600G sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
Approximated average price on current market:
Combo price: $1792. At 1080p Ultra, this combo delivers 90 FPS, equivalent to 0.05 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.093 fps/$ | 0.072 fps/$ | 0.070 fps/$ | 0.050 fps/$ |
| 1440p | 0.069 fps/$ | 0.055 fps/$ | 0.052 fps/$ | 0.041 fps/$ |
| 4k | 0.044 fps/$ | 0.036 fps/$ | 0.033 fps/$ | 0.026 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k medium, the Ryzen 5 4600G sets the ceiling at about 65 FPS, while the GeForce RTX 4090 could reach 159 FPS. In this scenario, the CPU limits the GPU potential by 59% (FPS gap: 94 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Ryzen 5 4600G is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 42% | CPU Limits GPU 46% | CPU Limits GPU 32% | CPU Limits GPU 43% |
| 1440p (2K QHD) | CPU Limits GPU 45% | CPU Limits GPU 50% | CPU Limits GPU 39% | CPU Limits GPU 42% |
| 4K (Ultra HD) | CPU Limits GPU 58% | CPU Limits GPU 59% | CPU Limits GPU 48% | CPU Limits GPU 49% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 18% below recommended and your GPU is 183% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-18%vsrecommended
+183%vsrecommended
+22%vsminimum
+521%vsminimum
Yes, the Ryzen 5 4600G paired with the GeForce RTX 4090 can run Throne and Liberty smoothly up to 1440p achieving around 74 FPS at Ultra quality. Your GPU is 183% above the recommended specs, and your CPU is 18% below the recommended requirements.
This CPU + GPU combo costs approximately $1792 ($143 CPU (Rank #154 Value) + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).
For Throne and Liberty, upgrading the CPU would have the biggest impact on performance. The Ryzen 5 4600G is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Throne and Liberty currently only supports AFMF (AMD Fluid Motion Frames) for frame generation, which is an AMD-exclusive technology. Because you are using an NVIDIA GPU, you cannot use Frame Generation for this specific game. However, the game does support DLSS Upscaling and FSR Upscaling and XeSS, which you should enable to render at a lower resolution and use AI to significantly boost your FPS without losing visual quality.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
