Hearts of Iron IV
Known to slow down in the late game due to the exponential number of unit calculations. Single-core CPU speed is the most important factor for performance.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 121 FPS. At 1440p, all settings exceed 112 FPS. At 4K, all settings exceed 101 FPS.
The GeForce RTX 4090 is 870% above the recommended GPU (GeForce GTX 570) for Hearts of Iron IV. The Ryzen 5 5600G is 674% above the recommended CPU (Core i5-750).
The GeForce RTX 4090 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 5 5600G still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $1809. At 1080p Ultra, this combo delivers 121 FPS, equivalent to 0.07 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.128 fps/$ | 0.095 fps/$ | 0.080 fps/$ | 0.067 fps/$ |
| 1440p | 0.103 fps/$ | 0.084 fps/$ | 0.074 fps/$ | 0.062 fps/$ |
| 4k | 0.091 fps/$ | 0.075 fps/$ | 0.066 fps/$ | 0.056 fps/$ |
* Table values represent FPS per Dollar (higher is better)
Affiliate Disclosure
ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
This chart answers a simple question: which upgrade is more likely to increase FPS first? In this case, the answer is clearly the GPU.
The largest gap appears at 1080p Low, where the GeForce RTX 4090 reaches about 116 FPS, while the Ryzen 5 5600G still has headroom up to roughly 232 FPS.
That means the GeForce RTX 4090 is hitting its performance ceiling first, leaving a 50% gap versus the Ryzen 5 5600G's available headroom in the most unbalanced scenario. Across all tested settings, this pairing is GPU-limited in 12 out of 12 cases, with 0 CPU-limited and 0 balanced results.
Overall, this is a clearly GPU-bound combination in this game.
The GeForce RTX 4090 is consistently the limiting part in this game, so upgrading the GPU is more likely to deliver a larger FPS gain than upgrading the CPU.
This chart shows which upgrade is more likely to unlock more FPS in each tested setting. The lower line represents the part that reaches its limit first. When the CPU and GPU lines stay close together, the system is more balanced. When the gap widens, one component is more clearly holding the other back. Hover any setting to inspect it.
The lower line is the current limiter. The closer the two lines are, the more balanced the CPU and GPU are for this game.
Each line represents an estimated FPS ceiling for one component, rather than live usage alone.
To estimate the CPU ceiling, we pair the Ryzen 5 5600G with GeForce RTX 5090, our current GPU anchor. To estimate the GPU ceiling, we pair the GeForce RTX 4090 with Ryzen 9 9950X3D, our current CPU anchor.
The lower line indicates the current limiter, since that component reaches its FPS ceiling first. In most scenarios, that is also the part most likely to deliver the bigger performance uplift if upgraded first.
The percentage shown represents the gap between the two ceilings. In practical terms, it shows how much of the stronger component's potential is left unused because the weaker one becomes the bottleneck first.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 674% above and your GPU is 870% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+674%vsrecommended
+870%vsrecommended
+450%vsminimum
+1112%vsminimum
Yes, the Ryzen 5 5600G paired with the GeForce RTX 4090 can run Hearts of Iron IV smoothly up to 4k achieving around 101 FPS at Ultra quality. Your GPU is 870% above the recommended specs, and your CPU is 674% above the recommended requirements.
This CPU + GPU combo costs approximately $1,809 ($160 CPU + $1,649 GPU). Your GeForce RTX 4090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 4090 is already a top-tier graphics card. In the Performance Limiter Analysis, it is still the side that most often reaches its FPS ceiling first, but there is no meaningful upgrade path that would drastically improve your Hearts of Iron IV performance right now. The main bottleneck appears on the GPU side. The largest gap shows up at 1080p Low, where the GPU reaches about 116 FPS while the CPU still has headroom up to roughly 232 FPS. Across all tested settings, the distribution is 12/12 GPU-limited, 0/12 CPU-limited, and 0/12 balanced.
Hearts of Iron IV does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Hearts of Iron IV requires at minimum a Core 2 Quad Q9400 (CPU) and GeForce GTX 470 (GPU) with 4 GB RAM and 2 GB storage. For the recommended experience, you need a Core i5-750 and GeForce GTX 570 with 4 GB RAM. Your Ryzen 5 5600G and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Hearts of Iron IV FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
