As the world's most popular MOBA, League of Legends runs on a proprietary engine that has been updated for over a decade. Recently, Riot increased the minimum requirements to include AVX instruction support and dropped support for older OSs and DirectX 9. While still lightweight, modern team fights with complex particle effects can strain older integrated graphics. The game scales well with single-thread CPU performance, meaning even modern entry-level processors can deliver high frame rates.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 327 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 264 FPS. At 4K, all settings exceed 204 FPS.
The GeForce RTX 4090 is 1277% above the recommended GPU (GeForce GTX 560) for League of Legends. The Ryzen 5 6600HS is 196% above the recommended CPU (Core i5-3330).
The Ryzen 5 6600HS sets the FPS ceiling at all 1080p settings, 1440p (low/medium/high), 4k (low/medium), while the GeForce RTX 4090 still has headroom. The FPS ceiling is closely matched at 1440p ultra, 4k (high/ultra).
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p low, the Ryzen 5 6600HS sets the ceiling at about 474 FPS, while the GeForce RTX 4090 could reach 661 FPS. In this scenario, the CPU limits the GPU potential by 28% (FPS gap: 187 FPS). Overall distribution: CPU limits 9/12 cells, GPU limits 0/12, balanced 3/12.
Your Ryzen 5 6600HS is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 28% | CPU Limits GPU 15% | CPU Limits GPU 9% | CPU Limits GPU 13% |
| 1440p (2K QHD) | CPU Limits GPU 17% | CPU Limits GPU 17% | CPU Limits GPU 9% | Balanced |
| 4K (Ultra HD) | CPU Limits GPU 9% | CPU Limits GPU 8% | Balanced | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU12% - 34% <> GPU36% - 39% <> | CPU18% - 49% <> GPU39% - 40% <> | CPU18% - 49% <> GPU39% - 40% <> | CPU17% - 43% <> GPU40% - 42% <> |
| 1440p (2K QHD) | CPU8% - 22% <> GPU47% - 48% <> | CPU14% - 36% <> GPU48% - 52% <> | CPU14% - 36% <> GPU48% - 52% <> | CPU12% - 30% <> GPU51% - 55% <> |
| 4K (Ultra HD) | CPU8% - 22% <> GPU63% - 64% <> | CPU14% - 36% <> GPU64% - 69% <> | CPU14% - 36% <> GPU64% - 69% <> | CPU12% - 29% <> GPU68% - 72% <> |
The Ryzen 5 6600HS + GeForce RTX 4090 pairing runs this title with CPU utilization between 8% and 49% and GPU utilization between 36% and 72%. Ryzen 5 6600HS keeps significant headroom across presets, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 40% at 1080p to 67% at 4K, while CPU averages move from 30% to 21%.
The utilization pattern is relatively even. The GeForce RTX 4090 reaches 70% average at its highest-load preset, while the Ryzen 5 6600HS peaks at 34% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 30% and GPU 40%. At 1440p, that shifts to CPU 22% and GPU 50%, and at 4K it reaches CPU 21% and GPU 67%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
4K (Ultra HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 20% (12-29%) and GPU 70% (68-72%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Ryzen 5 6600HS remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 5 6600HS and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 196% above and your GPU is 1277% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+196%vsrecommended
+1277%vsrecommended
+804%vsminimum
+6755%vsminimum
Yes, the Ryzen 5 6600HS paired with the GeForce RTX 4090 can run League of Legends smoothly up to 4k achieving around 204 FPS at Ultra quality. Your GPU is 1277% above the recommended specs, and your CPU is 196% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For League of Legends, upgrading the CPU would have the biggest impact on performance. The Ryzen 5 6600HS is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 4k low, 4k medium.
League of Legends does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
League of Legends requires at minimum a Core i3-530 (CPU) and GeForce 9600 GT (GPU) with 2 GB RAM and 16 GB storage. For the recommended experience, you need a Core i5-3330 and GeForce GTX 560 with 4 GB RAM. Your Ryzen 5 6600HS and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These League of Legends FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
