A heavy RE Engine title using advanced geometry and global illumination. It has sparked discussion by listing Frame Generation as a requirement for 60 FPS in its recommended specs. An SSD is mandatory.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 70 FPS. At 1440p, frame rates range from 52 to 93 FPS. At 4K, frame rates range from 26 to 51 FPS.
The GeForce RTX 4060 is 1% below recommended, but 45% above minimum for Monster Hunter Wilds. The Ryzen 5 7600 is 38% above the recommended CPU (Core i5-11600K).
At lower resolutions (4k (low/medium/high)), the Ryzen 5 7600 sets the FPS ceiling. As graphical load increases at (1080p (medium/high/ultra), 1440p ultra), the GeForce RTX 4060 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1080p low, 1440p (low/medium/high), 4k ultra.
Approximated average price on current market:
Combo price: $644.6600000000001. At 1080p Ultra, this combo delivers 70 FPS, equivalent to 0.11 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.209 fps/$ | 0.169 fps/$ | 0.127 fps/$ | 0.109 fps/$ |
| 1440p | 0.144 fps/$ | 0.113 fps/$ | 0.095 fps/$ | 0.081 fps/$ |
| 4k | 0.079 fps/$ | 0.064 fps/$ | 0.050 fps/$ | 0.040 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 1080p ultra, the GeForce RTX 4060 sets the ceiling at about 81 FPS, while the Ryzen 5 7600 has headroom up to 97 FPS. In this scenario, the GPU limits the CPU potential by 16% (FPS gap: 16 FPS). Overall distribution: GPU limits 6/12 cells, CPU limits 0/12, balanced 6/12.
Your GeForce RTX 4060 is the limiting side in the heaviest mismatch. This means part of the Ryzen 5 7600 frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | GPU Limits CPU 8% | GPU Limits CPU 13% | GPU Limits CPU 16% |
| 1440p (2K QHD) | Balanced | GPU Limits CPU 8% | GPU Limits CPU 13% | GPU Limits CPU 16% |
| 4K (Ultra HD) | Balanced | Balanced | Balanced | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 38% below recommended and your GPU is 1% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+38%vsrecommended
-1%vsrecommended
+53%vsminimum
+45%vsminimum
Yes, the Ryzen 5 7600 paired with the GeForce RTX 4060 can run Monster Hunter Wilds smoothly up to 1080p achieving around 70 FPS at Ultra quality. Your GPU is 1% below the recommended specs, and your CPU is 38% above the recommended requirements.
This CPU + GPU combo costs approximately $644.6600000000001 ($185 CPU + $459.66 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the Radeon RX 6900 XT for around $999 (Rank #190 for value) could deliver noticeably better performance.
For Monster Hunter Wilds, upgrading the GPU would give you the most noticeable improvement. The GeForce RTX 4060 is the limiting factor here, while the Ryzen 5 7600 still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p medium, 1080p high, 1080p ultra, 1440p ultra. CPU-limited at: 4k low, 4k medium, 4k high.
Monster Hunter Wilds does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Monster Hunter Wilds requires at minimum a Core i5-10600 (CPU) and GeForce GTX 1660 Super (GPU) with 16 GB RAM and 140 GB (SSD) storage. For the recommended experience, you need a Core i5-11600K and GeForce RTX 2070 Super with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Monster Hunter Wilds FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
