Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 46 to 91 FPS depending on quality settings. At 1440p, frame rates range from 39 to 77 FPS. At 4K, frame rates range from 24 to 45 FPS.
The GeForce RTX 4060 is 45% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The Ryzen 5 7600 is 38% above the recommended CPU (Core i5-11600K).
The GeForce RTX 4060 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 5 7600 still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $644.6600000000001. At 1080p Ultra, this combo delivers 46 FPS, equivalent to 0.07 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.141 fps/$ | 0.115 fps/$ | 0.095 fps/$ | 0.071 fps/$ |
| 1440p | 0.119 fps/$ | 0.101 fps/$ | 0.082 fps/$ | 0.060 fps/$ |
| 4k | 0.070 fps/$ | 0.060 fps/$ | 0.051 fps/$ | 0.037 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 4k low, the GeForce RTX 4060 sets the ceiling at about 63 FPS, while the Ryzen 5 7600 has headroom up to 149 FPS. In this scenario, the GPU limits the CPU potential by 58% (FPS gap: 86 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 4060 is the limiting side in the heaviest mismatch. This means part of the Ryzen 5 7600 frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 34% | GPU Limits CPU 37% | GPU Limits CPU 38% | GPU Limits CPU 42% |
| 1440p (2K QHD) | GPU Limits CPU 41% | GPU Limits CPU 41% | GPU Limits CPU 41% | GPU Limits CPU 43% |
| 4K (Ultra HD) | GPU Limits CPU 58% | GPU Limits CPU 58% | GPU Limits CPU 58% | GPU Limits CPU 58% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 38% above and your GPU is 45% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+38%vsrecommended
+45%vsrecommended
+106%vsminimum
+219%vsminimum
The Ryzen 5 7600 and GeForce RTX 4060 will struggle to run Throne and Liberty at smooth framerates. At 1080p Ultra, you can expect around 46 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $644.6600000000001 ($185 CPU + $459.66 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the Radeon RX 6900 XT for around $999 (Rank #190 for value) could deliver noticeably better performance.
For Throne and Liberty, upgrading the GPU would give you the most noticeable improvement. The GeForce RTX 4060 is the limiting factor here, while the Ryzen 5 7600 still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Throne and Liberty does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your Ryzen 5 7600 and GeForce RTX 4060 both exceed the recommended specs, so you're well-positioned for a great experience.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
