Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 179 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 140 FPS. At 4K, all settings exceed 121 FPS.
The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Ryzen 5 8500GE is 61% above the recommended CPU (Core i7-7700).
The Ryzen 5 8500GE sets the FPS ceiling at all 1080p settings, all 1440p settings, while the GeForce RTX 4090 still has headroom. The FPS ceiling is closely matched at all 4k settings.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p high, the Ryzen 5 8500GE sets the ceiling at about 198 FPS, while the GeForce RTX 4090 could reach 351 FPS. In this scenario, the CPU limits the GPU potential by 44% (FPS gap: 153 FPS). Overall distribution: CPU limits 8/12 cells, GPU limits 0/12, balanced 4/12.
Your Ryzen 5 8500GE is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 30% | CPU Limits GPU 38% | CPU Limits GPU 44% | CPU Limits GPU 38% |
| 1440p (2K QHD) | CPU Limits GPU 21% | CPU Limits GPU 33% | CPU Limits GPU 34% | CPU Limits GPU 28% |
| 4K (Ultra HD) | Balanced | Balanced | Balanced | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU51% - 77% <> GPU82% - 96% <> | CPU51% - 77% <> GPU82% - 96% <> | CPU19% - 49% <> GPU100% - 100% | CPU37% - 61% <> GPU95% - 100% <> |
| 1440p (2K QHD) | CPU48% - 74% <> GPU89% - 96% <> | CPU48% - 74% <> GPU89% - 96% <> | CPU15% - 46% <> GPU100% - 100% | CPU33% - 59% <> GPU100% - 100% |
| 4K (Ultra HD) | CPU47% - 65% <> GPU81% - 97% <> | CPU47% - 65% <> GPU81% - 97% <> | CPU12% - 36% <> GPU100% - 100% | CPU24% - 45% <> GPU98% - 100% <> |
The Ryzen 5 8500GE + GeForce RTX 4090 pairing runs this title with CPU utilization between 12% and 77% and GPU utilization between 81% and 100%. Ryzen 5 8500GE stays in a controlled operating range, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 94% at 1080p to 94% at 4K, while CPU averages move from 53% to 43%.
From a utilization perspective, this is a GPU-heavy load profile. At 1080p (Full HD) High, the GeForce RTX 4090 averages 100% usage (100-100%), while the Ryzen 5 8500GE stays at 34% (19-49%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 53% and GPU 94%. At 1440p, that shifts to CPU 50% and GPU 96%, and at 4K it reaches CPU 43% and GPU 94%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) Low is the most balanced preset based on this dataset. It runs around CPU 64% (51-77%) and GPU 89% (82-96%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Ryzen 5 8500GE remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The GeForce RTX 4090 reaches 100% average load at 1080p (Full HD) High while the Ryzen 5 8500GE still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 61% above and your GPU is 279% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+61%vsrecommended
+279%vsrecommended
+331%vsminimum
+877%vsminimum
Yes, the Ryzen 5 8500GE paired with the GeForce RTX 4090 can run Naraka: Bladepoint smoothly up to 4k achieving around 121 FPS at Ultra quality. Your GPU is 279% above the recommended specs, and your CPU is 61% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Naraka: Bladepoint, upgrading the CPU would have the biggest impact on performance. The Ryzen 5 8500GE is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra.
Naraka: Bladepoint does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your Ryzen 5 8500GE and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
