Grand Theft Auto VFPS onRyzen 7 5700&GeForce RTX 4090

Grand Theft Auto V

While the base game is older and lighter, GTA V remains relevant due to FiveM RP servers, which drastically increase RAM and CPU consumption due to mods and scripts. The official 'Enhanced' version also recommends modern hardware to handle increased traffic density.

Grand Theft Auto V - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low192 FPS
medium181 FPS
high178 FPS
ultra167 FPS
1440P
low174 FPS
medium160 FPS
high147 FPS
ultra129 FPS
4K
low148 FPS
medium130 FPS
high120 FPS
ultra101 FPS

Performance Report

Grand Theft Auto V

GeForce RTX 4090 + Ryzen 7 5700
🎮Visual Experience

At 1080p, all quality settings exceed 167 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 129 FPS. At 4K, all settings exceed 101 FPS.

Official Requirements

The GeForce RTX 4090 is 734% above the recommended GPU (GeForce GTX 660) for Grand Theft Auto V. The Ryzen 7 5700 is 310% above the recommended CPU (Core i5-3470).

AI Acceleration

Grand Theft Auto V supports: DLSS Frame Gen, FSR 3 Frame Gen, AFMF. The GeForce RTX 4090 can use DLSS Frame Gen and FSR 3 Frame Gen, providing up to 2x-3x frame rate boost.

⚙️FPS Ceiling Analysis

The Ryzen 7 5700 sets the FPS ceiling at 1440p (medium/high/ultra), while the GeForce RTX 4090 still has headroom. The FPS ceiling is closely matched at all 1080p settings, 1440p low, all 4k settings.

💰Value Analysis

Approximated average price on current market:

GeForce RTX 4090:$1649(updated 2/6/2026)
Official Launch Price: $1599
Ryzen 7 5700:$164(updated 2/6/2026)
Official Launch Price: $179

Combo price: $1813. At 1080p Ultra, this combo delivers 167 FPS, equivalent to 0.09 FPS per dollar.

ResolutionLowMediumHighUltra
1080p0.106 fps/$0.100 fps/$0.098 fps/$0.092 fps/$
1440p0.096 fps/$0.088 fps/$0.081 fps/$0.071 fps/$
4k0.082 fps/$0.072 fps/$0.066 fps/$0.056 fps/$

* Table values represent FPS per Dollar (higher is better)

Performance Limiter Analysis

Ryzen 7 5700|GeForce RTX 4090

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.

📈Analysis

At 1440p high, the Ryzen 7 5700 sets the ceiling at about 147 FPS, while the GeForce RTX 4090 could reach 172 FPS. In this scenario, the CPU limits the GPU potential by 15% (FPS gap: 25 FPS). Overall distribution: CPU limits 4/12 cells, GPU limits 0/12, balanced 8/12.

Verdict

Well Balanced

The Ryzen 7 5700 and GeForce RTX 4090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.

🧩Detailed Breakdown
1080p (Full HD)
LowBalanced
MediumBalanced
HighBalanced
UltraBalanced
1440p (2K QHD)
LowBalanced
MediumCPU Limits GPU 10%
HighCPU Limits GPU 15%
UltraCPU Limits GPU 12%
4K (Ultra HD)
LowBalanced
MediumBalanced
HighCPU Limits GPU 6%
UltraBalanced
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for Ryzen 7 5700 and GeForce RTX 4090

1080p (Full HD)

Low
CPU42% - 53%
<>
GPU80% - 92%
<>
Medium
CPU42% - 53%
<>
GPU94% - 96%
<>
High
CPU42% - 53%
<>
GPU94% - 96%
<>
Ultra
CPU39% - 56%
<>
GPU98% - 99%
<>

1440p (2K QHD)

Low
CPU26% - 46%
<>
GPU85% - 93%
<>
Medium
CPU26% - 47%
<>
GPU98% - 98%
High
CPU26% - 47%
<>
GPU98% - 98%
Ultra
CPU23% - 45%
<>
GPU98% - 99%
<>

4K (Ultra HD)

Low
CPU21% - 43%
<>
GPU85% - 93%
<>
Medium
CPU21% - 43%
<>
GPU97% - 99%
<>
High
CPU21% - 43%
<>
GPU97% - 99%
<>
Ultra
CPU16% - 41%
<>
GPU98% - 100%
<>

Performance Summary

The Ryzen 7 5700 + GeForce RTX 4090 pairing runs this title with CPU utilization between 16% and 56% and GPU utilization between 80% and 100%. Ryzen 7 5700 keeps significant headroom across presets, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 94% at 1080p to 96% at 4K, while CPU averages move from 48% to 31%.

Load Interpretation

From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) Ultra, the GeForce RTX 4090 averages 99% usage (98-100%), while the Ryzen 7 5700 stays at 28% (16-41%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.

Resolution Scaling

At 1080p, averages sit around CPU 48% and GPU 94%. At 1440p, that shifts to CPU 36% and GPU 96%, and at 4K it reaches CPU 31% and GPU 96%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.

Optimal Settings Recommendation

1440p (2K QHD) Low is the most balanced preset based on this dataset. It runs around CPU 36% (26-46%) and GPU 89% (85-93%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Ryzen 7 5700 remains stable for consistent frame delivery.

Upgrade Insight

Upgrade priority should be the GPU. The GeForce RTX 4090 reaches 99% average load at 4K (Ultra HD) Ultra while the Ryzen 7 5700 still has headroom, so a faster graphics card would deliver the largest uplift.

Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.

Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.

  • High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
  • High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
  • Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

Grand Theft Auto V Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Ryzen 7 5700
cpu icon
24,317
Your Score
MinimumCore 2 Quad Q6600
RecommendedCore i5-3470
GPU - GeForce RTX 4090
gpu icon
38,112
Your Score
MinimumGeForce 9800 GT
RecommendedGeForce GTX 660

Your CPU is 310% above and your GPU is 734% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.

CPU

+310%vsrecommended

GPU

+734%vsrecommended

CPU

+1062%vsminimum

GPU

+2650%vsminimum

Minimum Requirements
Video Card: GeForce 9800 GT
Memory: 4 GB
Disk Space: 72 GB
System: Windows 10 64-bit
Recommended Requirements
Video Card: GeForce GTX 660
Processor: Core i5-3470
Memory: 8 GB
Disk Space: 72 GB
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Ryzen 7 5700 and GeForce RTX 4090 run Grand Theft Auto V well?

Yes, the Ryzen 7 5700 paired with the GeForce RTX 4090 can run Grand Theft Auto V smoothly up to 4k achieving around 101 FPS at Ultra quality. Your GPU is 734% above the recommended specs, and your CPU is 310% above the recommended requirements.

2Is there a more cost-effective setup to run Grand Theft Auto V?

This CPU + GPU combo costs approximately $1813 ($164 CPU (Rank #66 Value) + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).

3Which component should I upgrade first to improve Grand Theft Auto V performance?

For Grand Theft Auto V, upgrading the CPU would have the biggest impact on performance. The Ryzen 7 5700 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1440p high, 1440p medium, 1440p ultra.

4Does this setup support Frame Generation for Grand Theft Auto V?

Yes! Grand Theft Auto V supports DLSS Frame Gen and FSR 3 Frame Gen and AFMF, and your GeForce RTX 4090 is compatible with DLSS Frame Gen and FSR 3 Frame Gen. With Frame Generation enabled, you can expect a 2x-3x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.

5What are the minimum and recommended specs for Grand Theft Auto V?

Grand Theft Auto V requires at minimum a Core 2 Quad Q6600 (CPU) and GeForce 9800 GT (GPU) with 4 GB RAM and 72 GB storage. For the recommended experience, you need a Core i5-3470 and GeForce GTX 660 with 8 GB RAM. Your Ryzen 7 5700 and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.

6How accurate are these Grand Theft Auto V FPS estimates for the Ryzen 7 5700 and GeForce RTX 4090?

These Grand Theft Auto V FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.