A dense RPG where Act 3 becomes a CPU stress test due to the high number of NPCs. An SSD is vital for loading times. 16GB of RAM is recommended, and the game benefits greatly from upscaling tech like DLSS and FSR.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 93 FPS. At 1440p, all settings exceed 73 FPS. At 4K, frame rates range from 44 to 67 FPS.
The GeForce RTX 3060 Ti is 23% above the recommended GPU (GeForce RTX 2060 Super) for Baldur's Gate 3. The Ryzen 7 5700X is 50% above the recommended CPU (Core i7-8700K).
At lower resolutions (1440p (high/ultra)), the Ryzen 7 5700X sets the FPS ceiling. As graphical load increases at (1080p (low/medium/high)), the GeForce RTX 3060 Ti becomes the FPS-limiting side. The FPS ceiling is closely matched at 1080p ultra, 1440p (low/medium), all 4k settings.
Approximated average price on current market:
Combo price: $455. At 1080p Ultra, this combo delivers 93 FPS, equivalent to 0.2 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.314 fps/$ | 0.275 fps/$ | 0.246 fps/$ | 0.204 fps/$ |
| 1440p | 0.266 fps/$ | 0.222 fps/$ | 0.198 fps/$ | 0.160 fps/$ |
| 4k | 0.147 fps/$ | 0.125 fps/$ | 0.119 fps/$ | 0.097 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 1080p low, the GeForce RTX 3060 Ti sets the ceiling at about 220 FPS, while the Ryzen 7 5700X has headroom up to 291 FPS. In this scenario, the GPU limits the CPU potential by 24% (FPS gap: 71 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 3060 Ti is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 5700X frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 24% | GPU Limits CPU 24% | GPU Limits CPU 24% | GPU Limits CPU 24% |
| 1440p (2K QHD) | GPU Limits CPU 24% | GPU Limits CPU 24% | GPU Limits CPU 24% | GPU Limits CPU 24% |
| 4K (Ultra HD) | GPU Limits CPU 24% | GPU Limits CPU 24% | GPU Limits CPU 24% | GPU Limits CPU 24% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 50% above and your GPU is 23% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+50%vsrecommended
+23%vsrecommended
+348%vsminimum
+111%vsminimum
Yes, the Ryzen 7 5700X paired with the GeForce RTX 3060 Ti can run Baldur's Gate 3 smoothly up to 1440p achieving around 73 FPS at Ultra quality. Your GPU is 23% above the recommended specs, and your CPU is 50% above the recommended requirements.
This CPU + GPU combo costs approximately $455 ($175 CPU + $280 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 4070 Ti for around $799 (Rank #248 for value) could deliver noticeably better performance.
For Baldur's Gate 3, upgrading the GPU would give you the most noticeable improvement. The GeForce RTX 3060 Ti is the limiting factor here, while the Ryzen 7 5700X still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high. CPU-limited at: 1440p high, 1440p ultra.
Baldur's Gate 3 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Baldur's Gate 3 requires at minimum a Core i5-4690 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 150 GB (SSD) storage. For the recommended experience, you need a Core i7-8700K and GeForce RTX 2060 Super with 16 GB RAM. Your Ryzen 7 5700X and GeForce RTX 3060 Ti both exceed the recommended specs, so you're well-positioned for a great experience.
These Baldur's Gate 3 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
