Optimized for mobile roots, the PC version offers higher resolution textures and volumetric shadows while keeping minimum specs low. It is light on the CPU but requires a dedicated GPU for stable 1080p/60FPS gameplay.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 62 FPS. At 1440p, frame rates range from 58 to 65 FPS. At 4K, frame rates range from 51 to 60 FPS.
The GeForce RTX 3060 Ti is 102% above the recommended GPU (GeForce GTX 1060) for Genshin Impact. The Ryzen 7 5700X is 23% below recommended, but 101% above minimum.
At lower resolutions (all 1080p settings), the Ryzen 7 5700X sets the FPS ceiling. As graphical load increases at (all 1440p settings, all 4k settings), the GeForce RTX 3060 Ti becomes the FPS-limiting side.
Approximated average price on current market:
Combo price: $455. At 1080p Ultra, this combo delivers 62 FPS, equivalent to 0.14 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.149 fps/$ | 0.141 fps/$ | 0.141 fps/$ | 0.136 fps/$ |
| 1440p | 0.143 fps/$ | 0.136 fps/$ | 0.132 fps/$ | 0.127 fps/$ |
| 4k | 0.132 fps/$ | 0.125 fps/$ | 0.121 fps/$ | 0.112 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 1080p low, the Ryzen 7 5700X sets the ceiling at about 98 FPS, while the GeForce RTX 3060 Ti could reach 133 FPS. In this scenario, the CPU limits the GPU potential by 26% (FPS gap: 35 FPS). Overall distribution: CPU limits 4/12 cells, GPU limits 8/12, balanced 0/12.
Your Ryzen 7 5700X is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 3060 Ti rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 26% | CPU Limits GPU 26% | CPU Limits GPU 26% | CPU Limits GPU 26% |
| 1440p (2K QHD) | GPU Limits CPU 26% | GPU Limits CPU 26% | GPU Limits CPU 26% | GPU Limits CPU 26% |
| 4K (Ultra HD) | GPU Limits CPU 26% | GPU Limits CPU 26% | GPU Limits CPU 26% | GPU Limits CPU 26% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 23% below recommended and your GPU is 102% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-23%vsrecommended
+102%vsrecommended
+101%vsminimum
+602%vsminimum
Yes, the Ryzen 7 5700X paired with the GeForce RTX 3060 Ti can run Genshin Impact smoothly up to 1080p achieving around 62 FPS at Ultra quality. Your GPU is 102% above the recommended specs, and your CPU is 23% below the recommended requirements.
This CPU + GPU combo costs approximately $455 ($175 CPU + $280 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 4070 Ti for around $799 (Rank #248 for value) could deliver noticeably better performance.
For Genshin Impact, upgrading the GPU would give you the most noticeable improvement. The GeForce RTX 3060 Ti is the limiting factor here, while the Ryzen 7 5700X still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra.
Genshin Impact does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Genshin Impact requires at minimum a Core i5 (CPU) and GeForce GT 1030 (GPU) with 8 GB RAM and 100 GB storage. For the recommended experience, you need a Core i7 and GeForce GTX 1060 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Genshin Impact FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
