Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 138 FPS. At 1440p, all settings exceed 113 FPS. At 4K, all settings exceed 68 FPS.
The GeForce RTX 4070 is 167% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Ryzen 7 5800X3D is 115% above the recommended CPU (Core i7-7700).
At lower resolutions (1080p (low/medium), 1440p low), the Ryzen 7 5800X3D sets the FPS ceiling. As graphical load increases at (1440p (high/ultra), all 4k settings), the GeForce RTX 4070 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1080p (high/ultra), 1440p medium.
Approximated average price on current market:
Combo price: $1399.99. At 1080p Ultra, this combo delivers 138 FPS, equivalent to 0.1 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.161 fps/$ | 0.130 fps/$ | 0.111 fps/$ | 0.099 fps/$ |
| 1440p | 0.131 fps/$ | 0.107 fps/$ | 0.092 fps/$ | 0.081 fps/$ |
| 4k | 0.081 fps/$ | 0.068 fps/$ | 0.054 fps/$ | 0.049 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 4k ultra, the GeForce RTX 4070 sets the ceiling at about 79 FPS, while the Ryzen 7 5800X3D has headroom up to 98 FPS. In this scenario, the GPU limits the CPU potential by 19% (FPS gap: 19 FPS). Overall distribution: GPU limits 6/12 cells, CPU limits 3/12, balanced 3/12.
Your GeForce RTX 4070 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 5800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 18% | CPU Limits GPU 14% | Balanced | Balanced |
| 1440p (2K QHD) | CPU Limits GPU 8% | Balanced | GPU Limits CPU 10% | GPU Limits CPU 11% |
| 4K (Ultra HD) | GPU Limits CPU 11% | GPU Limits CPU 13% | GPU Limits CPU 17% | GPU Limits CPU 19% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 115% above and your GPU is 167% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+115%vsrecommended
+167%vsrecommended
+476%vsminimum
+590%vsminimum
Yes, the Ryzen 7 5800X3D paired with the GeForce RTX 4070 can run Naraka: Bladepoint smoothly up to 4k achieving around 68 FPS at Ultra quality. Your GPU is 167% above the recommended specs, and your CPU is 115% above the recommended requirements.
This CPU + GPU combo costs approximately $1399.99 ($849.99 CPU + $550 GPU). Your GeForce RTX 4070 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating. For example, upgrading to the GeForce RTX 4080 for around $1199 (Rank #290 for value) could deliver noticeably better performance.
Your GeForce RTX 4070 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Naraka: Bladepoint performance right now. GPU fully utilized at: 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra. CPU-limited at: 1080p low, 1080p medium, 1440p low.
Naraka: Bladepoint does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your Ryzen 7 5800X3D and GeForce RTX 4070 both exceed the recommended specs, so you're well-positioned for a great experience.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
