Throne and Liberty FPS on Ryzen 7 5800X3D + Radeon RX 7900 XTX

Throne and Liberty

Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.

Throne and Liberty - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low220 FPS
medium190 FPS
high143 FPS
ultra113 FPS
1440P
low170 FPS
medium151 FPS
high115 FPS
ultra90 FPS
4K
low110 FPS
medium96 FPS
high63 FPS
ultra51 FPS

Performance Report

Throne and Liberty

Radeon RX 7900 XTX + Ryzen 7 5800X3D
🎮Visual Experience

At 1080p, all quality settings exceed 113 FPS. At 1440p, all settings exceed 90 FPS. At 4K, frame rates range from 51 to 110 FPS.

Official Requirements

The Radeon RX 7900 XTX is 133% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The Ryzen 7 5800X3D is 45% above the recommended CPU (Core i5-11600K).

⚙️FPS Ceiling Analysis

The Radeon RX 7900 XTX sets the FPS ceiling at 1080p ultra, 1440p ultra, 4k ultra, while the Ryzen 7 5800X3D still has additional frame-generation headroom. The FPS ceiling is closely matched at 1080p (low/medium/high), 1440p (low/medium/high), 4k (low/medium/high).

💰Value Analysis

Approximated average price on current market:

Radeon RX 7900 XTX:$930
Official Launch Price: $999
Ryzen 7 5800X3D:$849.99
Official Launch Price: $449

Combo price: $1779.99. At 1080p Ultra, this combo delivers 113 FPS, equivalent to 0.06 FPS per dollar.

ResolutionLowMediumHighUltra
1080p0.124 fps/$0.107 fps/$0.080 fps/$0.063 fps/$
1440p0.096 fps/$0.085 fps/$0.065 fps/$0.051 fps/$
4k0.062 fps/$0.054 fps/$0.035 fps/$0.029 fps/$

* Table values represent FPS per Dollar (higher is better)

Performance Limiter Analysis

Ryzen 7 5800X3D|Radeon RX 7900 XTX

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.

📈Analysis

At 1440p ultra, the Radeon RX 7900 XTX sets the ceiling at about 114 FPS, while the Ryzen 7 5800X3D has headroom up to 132 FPS. In this scenario, the GPU limits the CPU potential by 14% (FPS gap: 18 FPS). Overall distribution: GPU limits 3/12 cells, CPU limits 0/12, balanced 9/12.

Verdict

Well Balanced

The Ryzen 7 5800X3D and Radeon RX 7900 XTX stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.

🧩Detailed Breakdown
1080p (Full HD)
LowBalanced
MediumBalanced
HighBalanced
UltraGPU Limits CPU 11%
1440p (2K QHD)
LowBalanced
MediumBalanced
HighBalanced
UltraGPU Limits CPU 14%
4K (Ultra HD)
LowBalanced
MediumBalanced
HighBalanced
UltraGPU Limits CPU 14%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.

Throne and Liberty Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Ryzen 7 5800X3D
cpu icon
28,298
Your Score
MinimumCore i5-7700
RecommendedCore i5-11600K
GPU - Radeon RX 7900 XTX
gpu icon
31,285
Your Score
MinimumGeForce GTX 960
RecommendedGeForce GTX 1660

Your CPU is 45% above and your GPU is 133% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.

CPU

+45%vsrecommended

GPU

+133%vsrecommended

CPU

+115%vsminimum

GPU

+410%vsminimum

Minimum Requirements
Video Card: GeForce GTX 960
Processor: Core i5-7700
Memory: 16 GB
Disk Space: 63 GB
System: Windows 10 64-bit
Recommended Requirements
Video Card: GeForce GTX 1660
Processor: Core i5-11600K
Memory: 16 GB
Disk Space: 63 GB (SSD)
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Ryzen 7 5800X3D and Radeon RX 7900 XTX run Throne and Liberty well?

Yes, the Ryzen 7 5800X3D paired with the Radeon RX 7900 XTX can run Throne and Liberty smoothly up to 1440p achieving around 90 FPS at Ultra quality. Your GPU is 133% above the recommended specs, and your CPU is 45% above the recommended requirements.

2Is there a more cost-effective setup to run Throne and Liberty?

This CPU + GPU combo costs approximately $1779.99 ($849.99 CPU + $930 GPU). Your Radeon RX 7900 XTX provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating. For example, upgrading to the GeForce RTX 5090 D for around $1999 (Rank #374 for value) could deliver noticeably better performance.

3Which component should I upgrade first to improve Throne and Liberty performance?

Your Radeon RX 7900 XTX is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Throne and Liberty performance right now. GPU fully utilized at: 1080p ultra, 1440p ultra, 4k ultra.

4Does this setup support Frame Generation for Throne and Liberty?

Throne and Liberty does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Throne and Liberty?

Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your Ryzen 7 5800X3D and Radeon RX 7900 XTX both exceed the recommended specs, so you're well-positioned for a great experience.

6How accurate are these Throne and Liberty FPS estimates for the Ryzen 7 5800X3D and Radeon RX 7900 XTX?

These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.