Known to slow down in the late game due to the exponential number of unit calculations. Single-core CPU speed is the most important factor for performance.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 170 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 115 FPS. At 4K, all settings exceed 79 FPS.
The GeForce RTX 4090 is 870% above the recommended GPU (GeForce GTX 570) for Hearts of Iron IV. The Ryzen 7 7735H is 828% above the recommended CPU (Core i5-750).
At lower resolutions (4k (low/medium)), the Ryzen 7 7735H sets the FPS ceiling. As graphical load increases at (all 1080p settings, all 1440p settings), the GeForce RTX 4090 becomes the FPS-limiting side. The FPS ceiling is closely matched at 4k (high/ultra).
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p medium, the GeForce RTX 4090 sets the ceiling at about 113 FPS, while the Ryzen 7 7735H has headroom up to 283 FPS. In this scenario, the GPU limits the CPU potential by 60% (FPS gap: 170 FPS). Overall distribution: GPU limits 8/12 cells, CPU limits 2/12, balanced 2/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7735H frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 58% | GPU Limits CPU 60% | GPU Limits CPU 60% | GPU Limits CPU 55% |
| 1440p (2K QHD) | GPU Limits CPU 26% | GPU Limits CPU 26% | GPU Limits CPU 30% | GPU Limits CPU 21% |
| 4K (Ultra HD) | CPU Limits GPU 8% | CPU Limits GPU 8% | Balanced | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU25% - 92% <> GPU11% - 27% <> | CPU25% - 92% <> GPU11% - 27% <> | CPU25% - 92% <> GPU11% - 27% <> | CPU25% - 92% <> GPU11% - 27% <> |
| 1440p (2K QHD) | CPU24% - 100% <> GPU26% - 45% <> | CPU24% - 100% <> GPU26% - 45% <> | CPU24% - 100% <> GPU26% - 45% <> | CPU24% - 100% <> GPU26% - 45% <> |
| 4K (Ultra HD) | CPU21% - 100% <> GPU32% - 56% <> | CPU21% - 100% <> GPU32% - 56% <> | CPU21% - 100% <> GPU32% - 56% <> | CPU21% - 100% <> GPU32% - 56% <> |
The Ryzen 7 7735H + GeForce RTX 4090 pairing runs this title with CPU utilization between 21% and 100% and GPU utilization between 11% and 56%. Ryzen 7 7735H stays in a controlled operating range, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 19% at 1080p to 44% at 4K, while CPU averages move from 58% to 60%.
The utilization pattern is relatively even. The GeForce RTX 4090 reaches 44% average at its highest-load preset, while the Ryzen 7 7735H peaks at 62% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 58% and GPU 19%. At 1440p, that shifts to CPU 62% and GPU 36%, and at 4K it reaches CPU 60% and GPU 44%. This shows that GPU demand scales sharply with resolution while CPU load remains comparatively stable.
4K (Ultra HD) Low is the most balanced preset based on this dataset. It runs around CPU 60% (21-100%) and GPU 44% (32-56%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Ryzen 7 7735H remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 7 7735H and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 828% above and your GPU is 870% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+828%vsrecommended
+870%vsrecommended
+559%vsminimum
+1112%vsminimum
Yes, the Ryzen 7 7735H paired with the GeForce RTX 4090 can run Hearts of Iron IV smoothly up to 4k achieving around 79 FPS at Ultra quality. Your GPU is 870% above the recommended specs, and your CPU is 828% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Hearts of Iron IV performance right now. GPU fully utilized at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra. CPU-limited at: 4k low, 4k medium.
Hearts of Iron IV does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Hearts of Iron IV requires at minimum a Core 2 Quad Q9400 (CPU) and GeForce GTX 470 (GPU) with 4 GB RAM and 2 GB storage. For the recommended experience, you need a Core i5-750 and GeForce GTX 570 with 4 GB RAM. Your Ryzen 7 7735H and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Hearts of Iron IV FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
