A continuous open world with player-built structures creates a heavy streaming load. It scales well but recommends 6GB+ VRAM for higher settings.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 68 FPS. At 1440p, all settings exceed 61 FPS. At 4K, frame rates range from 29 to 44 FPS.
The Arc A550M is 11% below recommended, but 131% above minimum for Once Human. The Ryzen 7 7800X3D is 180% above the recommended CPU (Core i7-7700).
The Arc A550M sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k high, the Arc A550M sets the ceiling at about 40 FPS, while the Ryzen 7 7800X3D has headroom up to 113 FPS. In this scenario, the GPU limits the CPU potential by 65% (FPS gap: 73 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Arc A550M is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 33% | GPU Limits CPU 39% | GPU Limits CPU 37% | GPU Limits CPU 48% |
| 1440p (2K QHD) | GPU Limits CPU 43% | GPU Limits CPU 47% | GPU Limits CPU 45% | GPU Limits CPU 52% |
| 4K (Ultra HD) | GPU Limits CPU 62% | GPU Limits CPU 61% | GPU Limits CPU 65% | GPU Limits CPU 65% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU56% - 90% <> GPU53% - 73% <> | CPU56% - 90% <> GPU53% - 73% <> | CPU56% - 63% <> GPU70% - 85% <> | CPU56% - 63% <> GPU70% - 85% <> |
| 1440p (2K QHD) | CPU57% - 68% <> GPU56% - 75% <> | CPU57% - 68% <> GPU56% - 75% <> | CPU43% - 57% <> GPU77% - 88% <> | CPU43% - 57% <> GPU77% - 88% <> |
| 4K (Ultra HD) | CPU40% - 68% <> GPU56% - 75% <> | CPU40% - 68% <> GPU56% - 75% <> | CPU40% - 40% GPU76% - 88% <> | CPU40% - 40% GPU76% - 88% <> |
The Ryzen 7 7800X3D + Arc A550M pairing runs this title with CPU utilization between 40% and 90% and GPU utilization between 53% and 88%. Ryzen 7 7800X3D stays in a controlled operating range, while Arc A550M is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 71% at 1080p to 74% at 4K, while CPU averages move from 67% to 47%.
The utilization pattern is relatively even. The Arc A550M reaches 82% average at its highest-load preset, while the Ryzen 7 7800X3D peaks at 73% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 67% and GPU 71%. At 1440p, that shifts to CPU 56% and GPU 74%, and at 4K it reaches CPU 47% and GPU 74%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1440p (2K QHD) High is the most balanced preset based on this dataset. It runs around CPU 50% (43-57%) and GPU 82% (77-88%), which keeps Arc A550M well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 7 7800X3D and Arc A550M remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 180% below recommended and your GPU is 11% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+180%vsrecommended
-11%vsrecommended
+435%vsminimum
+131%vsminimum
Yes, the Ryzen 7 7800X3D paired with the Arc A550M can run Once Human smoothly up to 1440p achieving around 61 FPS at Ultra quality. Your GPU is 11% below the recommended specs, and your CPU is 180% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Once Human, upgrading the GPU would give you the most noticeable improvement. The Arc A550M is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Once Human does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Once Human requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 55 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Once Human FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
