Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 97 FPS. At 1440p, all settings exceed 89 FPS. At 4K, all settings exceed 83 FPS.
The Arc A770 is 32% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Ryzen 7 7800X3D is 161% above the recommended CPU (Core i7-7700).
Naraka: Bladepoint supports: DLSS Frame Gen, FSR 3 Frame Gen, AFMF. However, the Arc A770 is not compatible with these technologies.
At lower resolutions (all 1080p settings), the Ryzen 7 7800X3D sets the FPS ceiling. As graphical load increases at (1440p ultra, all 4k settings), the Arc A770 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1440p (low/medium/high).
Approximated average price on current market:
Combo price: $664. At 1080p Ultra, this combo delivers 97 FPS, equivalent to 0.15 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.286 fps/$ | 0.211 fps/$ | 0.167 fps/$ | 0.146 fps/$ |
| 1440p | 0.247 fps/$ | 0.188 fps/$ | 0.152 fps/$ | 0.134 fps/$ |
| 4k | 0.188 fps/$ | 0.167 fps/$ | 0.140 fps/$ | 0.125 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p high, the Ryzen 7 7800X3D sets the ceiling at about 184 FPS, while the Arc A770 could reach 240 FPS. In this scenario, the CPU limits the GPU potential by 23% (FPS gap: 56 FPS). Overall distribution: CPU limits 4/12 cells, GPU limits 5/12, balanced 3/12.
Your Ryzen 7 7800X3D is the limiting side in the heaviest mismatch. This means part of the Arc A770 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 12% | CPU Limits GPU 16% | CPU Limits GPU 23% | CPU Limits GPU 9% |
| 1440p (2K QHD) | Balanced | Balanced | Balanced | GPU Limits CPU 14% |
| 4K (Ultra HD) | GPU Limits CPU 19% | GPU Limits CPU 16% | GPU Limits CPU 13% | GPU Limits CPU 19% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 161% above and your GPU is 32% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+161%vsrecommended
+32%vsrecommended
+598%vsminimum
+242%vsminimum
Yes, the Ryzen 7 7800X3D paired with the Arc A770 can run Naraka: Bladepoint smoothly up to 4k achieving around 83 FPS at Ultra quality. Your GPU is 32% above the recommended specs, and your CPU is 161% above the recommended requirements.
This CPU + GPU combo costs approximately $664 ($384 CPU (Rank #212 Value) + $280 GPU (Rank #56 Value)). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance.
For Naraka: Bladepoint, upgrading the GPU would give you the most noticeable improvement. The Arc A770 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra. CPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra.
Naraka: Bladepoint supports DLSS Frame Gen and FSR 3 Frame Gen and AFMF, but your Arc A770 is not compatible with all of them. Frame Generation is typically available on newer GPUs like the RTX 40-series (DLSS 3) or modern AMD cards (FSR 3).
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your Ryzen 7 7800X3D and Arc A770 both exceed the recommended specs, so you're well-positioned for a great experience.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
