A masterpiece of the RAGE engine, heavily taxing the GPU with volumetric lighting and water physics. Interestingly, it has relatively low CPU utilization compared to its graphical demands. Be prepared for a massive 150GB install size.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 63 FPS. At 1440p, frame rates range from 50 to 76 FPS. At 4K, frame rates range from 27 to 41 FPS.
The Arc A770 is 32% above the recommended GPU (GeForce GTX 1060) for Red Dead Redemption 2. The Ryzen 7 7800X3D is 278% above the recommended CPU (Core i7-4770K).
The Arc A770 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $664. At 1080p Ultra, this combo delivers 63 FPS, equivalent to 0.09 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.169 fps/$ | 0.149 fps/$ | 0.113 fps/$ | 0.095 fps/$ |
| 1440p | 0.114 fps/$ | 0.105 fps/$ | 0.095 fps/$ | 0.075 fps/$ |
| 4k | 0.062 fps/$ | 0.056 fps/$ | 0.048 fps/$ | 0.041 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k low, the Arc A770 sets the ceiling at about 43 FPS, while the Ryzen 7 7800X3D has headroom up to 117 FPS. In this scenario, the GPU limits the CPU potential by 63% (FPS gap: 74 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Arc A770 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 46% | GPU Limits CPU 45% | GPU Limits CPU 54% | GPU Limits CPU 58% |
| 1440p (2K QHD) | GPU Limits CPU 55% | GPU Limits CPU 52% | GPU Limits CPU 55% | GPU Limits CPU 60% |
| 4K (Ultra HD) | GPU Limits CPU 63% | GPU Limits CPU 62% | GPU Limits CPU 61% | GPU Limits CPU 61% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU50% - 59% <> GPU48% - 76% <> | CPU50% - 56% <> GPU83% - 96% <> | CPU30% - 39% <> GPU83% - 96% <> | CPU22% - 39% <> GPU88% - 100% <> |
| 1440p (2K QHD) | CPU21% - 47% <> GPU57% - 80% <> | CPU22% - 43% <> GPU88% - 100% <> | CPU21% - 43% <> GPU87% - 99% <> | CPU20% - 42% <> GPU88% - 100% <> |
| 4K (Ultra HD) | CPU16% - 34% <> GPU72% - 82% <> | CPU19% - 32% <> GPU100% - 100% | CPU17% - 30% <> GPU100% - 100% | CPU12% - 25% <> GPU100% - 100% |
The Ryzen 7 7800X3D + Arc A770 pairing runs this title with CPU utilization between 12% and 59% and GPU utilization between 48% and 100%. Ryzen 7 7800X3D keeps significant headroom across presets, while Arc A770 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 84% at 1080p to 94% at 4K, while CPU averages move from 43% to 23%.
From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) Medium, the Arc A770 averages 100% usage (100-100%), while the Ryzen 7 7800X3D stays at 26% (19-32%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 43% and GPU 84%. At 1440p, that shifts to CPU 32% and GPU 87%, and at 4K it reaches CPU 23% and GPU 94%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) Medium is the most balanced preset based on this dataset. It runs around CPU 53% (50-56%) and GPU 90% (83-96%), which keeps Arc A770 well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The Arc A770 reaches 100% average load at 4K (Ultra HD) Medium while the Ryzen 7 7800X3D still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 278% above and your GPU is 32% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+278%vsrecommended
+32%vsrecommended
+728%vsminimum
+124%vsminimum
Yes, the Ryzen 7 7800X3D paired with the Arc A770 can run Red Dead Redemption 2 smoothly up to 1080p achieving around 63 FPS at Ultra quality. Your GPU is 32% above the recommended specs, and your CPU is 278% above the recommended requirements.
This CPU + GPU combo costs approximately $664 ($384 CPU (Rank #212 Value) + $280 GPU (Rank #56 Value)). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance.
For Red Dead Redemption 2, upgrading the GPU would give you the most noticeable improvement. The Arc A770 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Red Dead Redemption 2 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Red Dead Redemption 2 requires at minimum a Core i5-2500K (CPU) and GeForce GTX 770 (GPU) with 8 GB RAM and 150 GB storage. For the recommended experience, you need a Core i7-4770K and GeForce GTX 1060 with 12 GB RAM. Your Ryzen 7 7800X3D and Arc A770 both exceed the recommended specs, so you're well-positioned for a great experience.
These Red Dead Redemption 2 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
