Valve's new MOBA/Shooter hybrid. It has higher requirements than Dota 2, with 16GB of RAM recommended for a smooth experience.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 138 FPS. At 1440p, all settings exceed 129 FPS. At 4K, all settings exceed 66 FPS.
The Arc A770M is 18% above the recommended GPU (GeForce GTX 1060) for Deadlock. The Ryzen 7 7800X3D is 161% above the recommended CPU (Core i7-6700K).
The Arc A770M sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the Arc A770M sets the ceiling at about 60 FPS, while the Ryzen 7 7800X3D has headroom up to 112 FPS. In this scenario, the GPU limits the CPU potential by 46% (FPS gap: 52 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Arc A770M is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 18% | GPU Limits CPU 17% | GPU Limits CPU 16% | GPU Limits CPU 17% |
| 1440p (2K QHD) | GPU Limits CPU 36% | GPU Limits CPU 36% | GPU Limits CPU 34% | GPU Limits CPU 36% |
| 4K (Ultra HD) | GPU Limits CPU 42% | GPU Limits CPU 44% | GPU Limits CPU 43% | GPU Limits CPU 46% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU76% - 76% GPU46% - 78% <> | CPU69% - 75% <> GPU78% - 84% <> | CPU36% - 64% <> GPU80% - 92% <> | CPU31% - 64% <> GPU78% - 92% <> |
| 1440p (2K QHD) | CPU58% - 70% <> GPU56% - 87% <> | CPU56% - 69% <> GPU88% - 93% <> | CPU37% - 53% <> GPU90% - 100% <> | CPU32% - 51% <> GPU91% - 100% <> |
| 4K (Ultra HD) | CPU48% - 60% <> GPU57% - 88% <> | CPU48% - 59% <> GPU88% - 92% <> | CPU27% - 48% <> GPU90% - 100% <> | CPU21% - 46% <> GPU91% - 100% <> |
The Ryzen 7 7800X3D + Arc A770M pairing runs this title with CPU utilization between 21% and 76% and GPU utilization between 46% and 100%. Ryzen 7 7800X3D stays in a controlled operating range, while Arc A770M carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 79% at 1080p to 88% at 4K, while CPU averages move from 62% to 45%.
From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) Ultra, the Arc A770M averages 96% usage (91-100%), while the Ryzen 7 7800X3D stays at 42% (32-51%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 62% and GPU 79%. At 1440p, that shifts to CPU 53% and GPU 88%, and at 4K it reaches CPU 45% and GPU 88%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) High is the most balanced preset based on this dataset. It runs around CPU 50% (36-64%) and GPU 86% (80-92%), which keeps Arc A770M well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 7 7800X3D and Arc A770M remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 161% above and your GPU is 18% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+161%vsrecommended
+18%vsrecommended
+435%vsminimum
+193%vsminimum
Yes, the Ryzen 7 7800X3D paired with the Arc A770M can run Deadlock smoothly up to 4k achieving around 66 FPS at Ultra quality. Your GPU is 18% above the recommended specs, and your CPU is 161% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Deadlock, upgrading the GPU would give you the most noticeable improvement. The Arc A770M is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Deadlock does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Deadlock requires at minimum a Core i5-2500K (CPU) and GeForce GTX 660 (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-6700K and GeForce GTX 1060 with 16 GB RAM. Your Ryzen 7 7800X3D and Arc A770M both exceed the recommended specs, so you're well-positioned for a great experience.
These Deadlock FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
