Apex LegendsFPS onRyzen 7 7800X3D&GeForce 310

Apex Legends

Built on a modified Source engine, Apex Legends retains the scalability of Titanfall 2. Fast movement demands high frame rates for fluidity. VRAM can be a bottleneck if the 'Texture Streaming Budget' is set too high. While it handles 8GB of RAM better than some competitors, 16GB is recommended. It is generally less CPU-intensive than Warzone, allowing older quad-core CPUs to remain viable.

This game has a built-in FPS cap of 300 FPS

Apex Legends - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low6 FPS
medium5 FPS
high4 FPS
ultra3 FPS
1440P
low5 FPS
medium4 FPS
high3 FPS
ultra2 FPS
4K
low3 FPS
medium3 FPS
high2 FPS
ultra2 FPS

Performance Report

Apex Legends

GeForce 310 + Ryzen 7 7800X3D
🎮Visual Experience

At 1080p, frame rates range from 3 to 6 FPS depending on quality settings. At 1440p, frame rates range from 2 to 5 FPS. At 4K, frame rates range from 2 to 3 FPS.

⚠️Official Requirements

The GeForce 310 is 88% below minimum GPU requirement for Apex Legends. The Ryzen 7 7800X3D is 278% above the recommended CPU (Core i5-3570K).

⚙️FPS Ceiling Analysis

The GeForce 310 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.

💰Value Analysis

Approximated average price on current market:

GeForce 310:$5(updated 2/10/2026)
Official Launch Price: $45
Ryzen 7 7800X3D:$384(updated 2/6/2026)
Official Launch Price: $449

Combo price: $389. At 1080p Ultra, this combo delivers 3 FPS, equivalent to 0.01 FPS per dollar.

ResolutionLowMediumHighUltra
1080p0.015 fps/$0.013 fps/$0.010 fps/$0.008 fps/$
1440p0.013 fps/$0.010 fps/$0.008 fps/$0.005 fps/$
4k0.008 fps/$0.008 fps/$0.005 fps/$0.005 fps/$

* Table values represent FPS per Dollar (higher is better)

Performance Limiter Analysis

Ryzen 7 7800X3D|GeForce 310

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.

📈Analysis

At 1080p medium, the GeForce 310 sets the ceiling at about 5 FPS, while the Ryzen 7 7800X3D has headroom up to 349 FPS. In this scenario, the GPU limits the CPU potential by 99% (FPS gap: 344 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.

Verdict

GPU Limits CPU

Your GeForce 310 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.

🧩Detailed Breakdown
1080p (Full HD)
LowGPU Limits CPU 98%
MediumGPU Limits CPU 99%
HighGPU Limits CPU 99%
UltraGPU Limits CPU 99%
1440p (2K QHD)
LowGPU Limits CPU 99%
MediumGPU Limits CPU 99%
HighGPU Limits CPU 99%
UltraGPU Limits CPU 99%
4K (Ultra HD)
LowGPU Limits CPU 99%
MediumGPU Limits CPU 99%
HighGPU Limits CPU 99%
UltraGPU Limits CPU 99%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for Ryzen 7 7800X3D and GeForce 310

1080p (Full HD)

Low
CPU29% - 36%
<>
GPU81% - 95%
<>
Medium
CPU30% - 34%
<>
GPU92% - 100%
<>
High
CPU30% - 36%
<>
GPU91% - 99%
<>
Ultra
CPU30% - 34%
<>
GPU92% - 99%
<>

1440p (2K QHD)

Low
CPU28% - 33%
<>
GPU82% - 95%
<>
Medium
CPU28% - 31%
<>
GPU96% - 100%
<>
High
CPU28% - 32%
<>
GPU96% - 100%
<>
Ultra
CPU30% - 32%
<>
GPU95% - 100%
<>

4K (Ultra HD)

Low
CPU26% - 33%
<>
GPU83% - 95%
<>
Medium
CPU27% - 31%
<>
GPU96% - 100%
<>
High
CPU27% - 32%
<>
GPU96% - 100%
<>
Ultra
CPU28% - 32%
<>
GPU96% - 100%
<>

Performance Summary

The Ryzen 7 7800X3D + GeForce 310 pairing runs this title with CPU utilization between 26% and 36% and GPU utilization between 81% and 100%. Ryzen 7 7800X3D keeps significant headroom across presets, while GeForce 310 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 94% at 1080p to 96% at 4K, while CPU averages move from 32% to 30%.

Load Interpretation

From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) Medium, the GeForce 310 averages 98% usage (96-100%), while the Ryzen 7 7800X3D stays at 30% (28-31%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.

Resolution Scaling

At 1080p, averages sit around CPU 32% and GPU 94%. At 1440p, that shifts to CPU 30% and GPU 96%, and at 4K it reaches CPU 30% and GPU 96%. This shows that workload scaling is limited, which can indicate engine-side constraints.

Optimal Settings Recommendation

1080p (Full HD) Low is the most balanced preset based on this dataset. It runs around CPU 32% (29-36%) and GPU 88% (81-95%), which keeps GeForce 310 well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.

Upgrade Insight

Upgrade priority should be the GPU. The GeForce 310 reaches 98% average load at 1440p (2K QHD) Medium while the Ryzen 7 7800X3D still has headroom, so a faster graphics card would deliver the largest uplift.

Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.

Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.

  • High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
  • High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
  • Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

Apex Legends Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Ryzen 7 7800X3D
cpu icon
34,293
Your Score
MinimumCore i3-6300
RecommendedCore i5-3570K
GPU - GeForce 310
gpu icon
143
Your Score
MinimumGeForce GT 640
RecommendedGeForce GTX 970

Your hardware is below minimum requirements. GPU is the limiting factor (88% below minimum). Expect performance issues. Low settings recommended.

CPU

+278%vsrecommended

GPU

-99%vsrecommended

CPU

+692%vsminimum

GPU

-88%vsminimum

Minimum Requirements
Video Card: GeForce GT 640
Processor: Core i3-6300
Memory: 6 GB
Disk Space: 56 GB
System: Windows 10 64-bit
Recommended Requirements
Video Card: GeForce GTX 970
Processor: Core i5-3570K
Memory: 8 GB
Disk Space: 56 GB (SSD)
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Ryzen 7 7800X3D and GeForce 310 run Apex Legends well?

The Ryzen 7 7800X3D and GeForce 310 will struggle to run Apex Legends at smooth framerates. At 1080p Ultra, you can expect around 3 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.

2Is there a more cost-effective setup to run Apex Legends?

This CPU + GPU combo costs approximately $389 ($384 CPU (Rank #212 Value) + $5 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce GTX 1080 SLI (móvel) (Rank #2 for value) could deliver noticeably better performance.

3Which component should I upgrade first to improve Apex Legends performance?

For Apex Legends, upgrading the GPU would give you the most noticeable improvement. The GeForce 310 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.

4Does this setup support Frame Generation for Apex Legends?

Apex Legends does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Apex Legends?

Apex Legends requires at minimum a Core i3-6300 (CPU) and GeForce GT 640 (GPU) with 6 GB RAM and 56 GB storage. For the recommended experience, you need a Core i5-3570K and GeForce GTX 970 with 8 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.

6How accurate are these Apex Legends FPS estimates for the Ryzen 7 7800X3D and GeForce 310?

These Apex Legends FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.