A competitor to Overwatch featuring environmental destruction, which makes it CPU heavy. DX12 and 12GB of RAM are the minimum requirements.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 2 to 8 FPS depending on quality settings. At 1440p, frame rates range from 2 to 6 FPS. At 4K, frame rates range from 1 to 4 FPS.
The GeForce G102M is 98% below minimum GPU requirement for Marvel Rivals. The Ryzen 7 7800X3D is 57% above the recommended CPU (Core i5-10400).
The GeForce G102M sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p low, the GeForce G102M sets the ceiling at about 8 FPS, while the Ryzen 7 7800X3D has headroom up to 548 FPS. In this scenario, the GPU limits the CPU potential by 99% (FPS gap: 540 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce G102M is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 99% | GPU Limits CPU 99% | GPU Limits CPU 99% | GPU Limits CPU 99% |
| 1440p (2K QHD) | GPU Limits CPU 98% | GPU Limits CPU 98% | GPU Limits CPU 98% | GPU Limits CPU 99% |
| 4K (Ultra HD) | GPU Limits CPU 98% | GPU Limits CPU 98% | GPU Limits CPU 99% | GPU Limits CPU 99% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU23% - 62% <> GPU86% - 96% <> | CPU23% - 63% <> GPU88% - 97% <> | CPU23% - 63% <> GPU88% - 97% <> | CPU26% - 64% <> GPU85% - 97% <> |
| 1440p (2K QHD) | CPU20% - 58% <> GPU95% - 98% <> | CPU20% - 59% <> GPU96% - 100% <> | CPU20% - 59% <> GPU96% - 100% <> | CPU19% - 59% <> GPU96% - 100% <> |
| 4K (Ultra HD) | CPU12% - 38% <> GPU95% - 98% <> | CPU12% - 39% <> GPU97% - 100% <> | CPU12% - 39% <> GPU97% - 100% <> | CPU12% - 39% <> GPU98% - 100% <> |
The Ryzen 7 7800X3D + GeForce G102M pairing runs this title with CPU utilization between 12% and 64% and GPU utilization between 85% and 100%. Ryzen 7 7800X3D keeps significant headroom across presets, while GeForce G102M carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 92% at 1080p to 98% at 4K, while CPU averages move from 43% to 26%.
From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) Ultra, the GeForce G102M averages 99% usage (98-100%), while the Ryzen 7 7800X3D stays at 26% (12-39%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 43% and GPU 92%. At 1440p, that shifts to CPU 40% and GPU 98%, and at 4K it reaches CPU 26% and GPU 98%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) Low is the most balanced preset based on this dataset. It runs around CPU 42% (23-62%) and GPU 91% (86-96%), which keeps GeForce G102M well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The GeForce G102M reaches 99% average load at 4K (Ultra HD) Ultra while the Ryzen 7 7800X3D still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. GPU is the limiting factor (98% below minimum). Expect performance issues. Low settings recommended.
+57%vsrecommended
-99%vsrecommended
+164%vsminimum
-98%vsminimum
The Ryzen 7 7800X3D and GeForce G102M will struggle to run Marvel Rivals at smooth framerates. At 1080p Ultra, you can expect around 2 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Marvel Rivals, upgrading the GPU would give you the most noticeable improvement. The GeForce G102M is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Marvel Rivals does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Marvel Rivals requires at minimum a Core i5-6600K (CPU) and GeForce GTX 1060 (GPU) with 12 GB RAM and 70 GB storage. For the recommended experience, you need a Core i5-10400 and GeForce RTX 2060 Super with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Marvel Rivals FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
