Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 40 to 95 FPS depending on quality settings. At 1440p, frame rates range from 23 to 55 FPS. At 4K, frame rates range from 12 to 30 FPS.
The GeForce GTX 1060 5GB is 9% below recommended, but 135% above minimum for Naraka: Bladepoint. The Ryzen 7 7800X3D is 161% above the recommended CPU (Core i7-7700).
Naraka: Bladepoint supports: DLSS Frame Gen, FSR 3 Frame Gen, AFMF. The GeForce GTX 1060 5GB can use FSR 3 Frame Gen, providing up to 1.5x-2x frame rate boost.
The GeForce GTX 1060 5GB sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $449. At 1080p Ultra, this combo delivers 40 FPS, equivalent to 0.09 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.212 fps/$ | 0.163 fps/$ | 0.116 fps/$ | 0.089 fps/$ |
| 1440p | 0.122 fps/$ | 0.089 fps/$ | 0.065 fps/$ | 0.051 fps/$ |
| 4k | 0.067 fps/$ | 0.049 fps/$ | 0.031 fps/$ | 0.027 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the GeForce GTX 1060 5GB sets the ceiling at about 12 FPS, while the Ryzen 7 7800X3D has headroom up to 115 FPS. In this scenario, the GPU limits the CPU potential by 90% (FPS gap: 103 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce GTX 1060 5GB is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 53% | GPU Limits CPU 46% | GPU Limits CPU 52% | GPU Limits CPU 64% |
| 1440p (2K QHD) | GPU Limits CPU 72% | GPU Limits CPU 72% | GPU Limits CPU 76% | GPU Limits CPU 81% |
| 4K (Ultra HD) | GPU Limits CPU 82% | GPU Limits CPU 84% | GPU Limits CPU 89% | GPU Limits CPU 90% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 161% below recommended and your GPU is 9% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+161%vsrecommended
-9%vsrecommended
+598%vsminimum
+135%vsminimum
The Ryzen 7 7800X3D and GeForce GTX 1060 5GB will struggle to run Naraka: Bladepoint at smooth framerates. At 1080p Ultra, you can expect around 40 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $449 ($384 CPU (Rank #212 Value) + $65 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance.
For Naraka: Bladepoint, upgrading the GPU would give you the most noticeable improvement. The GeForce GTX 1060 5GB is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! Naraka: Bladepoint supports DLSS Frame Gen and FSR 3 Frame Gen and AFMF, and your GeForce GTX 1060 5GB is compatible with FSR 3 Frame Gen. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
