A masterpiece of the RAGE engine, heavily taxing the GPU with volumetric lighting and water physics. Interestingly, it has relatively low CPU utilization compared to its graphical demands. Be prepared for a massive 150GB install size.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 44 to 73 FPS depending on quality settings. At 1440p, frame rates range from 27 to 50 FPS. At 4K, frame rates range from 12 to 24 FPS.
The GeForce GTX 1060 6 GB is 0% above the recommended GPU (GeForce GTX 1060) for Red Dead Redemption 2. The Ryzen 7 7800X3D is 278% above the recommended CPU (Core i7-4770K).
Red Dead Redemption 2 supports: AFMF. This game does not have native DLSS 3 or FSR 3 Frame Generation support. AFMF is AMD-exclusive and not compatible with GeForce GTX 1060 6 GB.
The GeForce GTX 1060 6 GB sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $449. At 1080p Ultra, this combo delivers 44 FPS, equivalent to 0.1 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.163 fps/$ | 0.140 fps/$ | 0.114 fps/$ | 0.098 fps/$ |
| 1440p | 0.111 fps/$ | 0.096 fps/$ | 0.076 fps/$ | 0.060 fps/$ |
| 4k | 0.053 fps/$ | 0.047 fps/$ | 0.033 fps/$ | 0.027 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k high, the GeForce GTX 1060 6 GB sets the ceiling at about 15 FPS, while the Ryzen 7 7800X3D has headroom up to 87 FPS. In this scenario, the GPU limits the CPU potential by 83% (FPS gap: 72 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce GTX 1060 6 GB is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 69% | GPU Limits CPU 69% | GPU Limits CPU 70% | GPU Limits CPU 71% |
| 1440p (2K QHD) | GPU Limits CPU 72% | GPU Limits CPU 72% | GPU Limits CPU 76% | GPU Limits CPU 78% |
| 4K (Ultra HD) | GPU Limits CPU 80% | GPU Limits CPU 81% | GPU Limits CPU 83% | GPU Limits CPU 83% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 278% above and your GPU is 0% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+278%vsrecommended
+0%vsrecommended
+728%vsminimum
+69%vsminimum
The Ryzen 7 7800X3D and GeForce GTX 1060 6 GB will struggle to run Red Dead Redemption 2 at smooth framerates. At 1080p Ultra, you can expect around 44 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $449 ($384 CPU (Rank #212 Value) + $65 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance.
For Red Dead Redemption 2, upgrading the GPU would give you the most noticeable improvement. The GeForce GTX 1060 6 GB is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Red Dead Redemption 2 supports AFMF, but your GeForce GTX 1060 6 GB is not compatible with these technologies. Frame Generation is typically available on newer GPUs like the RTX 40-series (DLSS 3) or modern AMD cards (FSR 3).
Red Dead Redemption 2 requires at minimum a Core i5-2500K (CPU) and GeForce GTX 770 (GPU) with 8 GB RAM and 150 GB storage. For the recommended experience, you need a Core i7-4770K and GeForce GTX 1060 with 12 GB RAM. Your Ryzen 7 7800X3D and GeForce GTX 1060 6 GB both exceed the recommended specs, so you're well-positioned for a great experience.
These Red Dead Redemption 2 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
