A dense RPG where Act 3 becomes a CPU stress test due to the high number of NPCs. An SSD is vital for loading times. 16GB of RAM is recommended, and the game benefits greatly from upscaling tech like DLSS and FSR.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 85 FPS. At 1440p, frame rates range from 55 to 102 FPS. At 4K, frame rates range from 26 to 44 FPS.
The GeForce GTX 1070 (Mobile) is 36% below recommended, but 9% above minimum for Baldur's Gate 3. The Ryzen 7 7800X3D is 94% above the recommended CPU (Core i7-8700K).
The GeForce GTX 1070 (Mobile) sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k high, the GeForce GTX 1070 (Mobile) sets the ceiling at about 23 FPS, while the Ryzen 7 7800X3D has headroom up to 115 FPS. In this scenario, the GPU limits the CPU potential by 80% (FPS gap: 92 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce GTX 1070 (Mobile) is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 24% | GPU Limits CPU 33% | GPU Limits CPU 30% | GPU Limits CPU 37% |
| 1440p (2K QHD) | GPU Limits CPU 47% | GPU Limits CPU 52% | GPU Limits CPU 51% | GPU Limits CPU 54% |
| 4K (Ultra HD) | GPU Limits CPU 77% | GPU Limits CPU 79% | GPU Limits CPU 80% | GPU Limits CPU 80% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU32% - 44% <> GPU65% - 85% <> | CPU32% - 37% <> GPU77% - 88% <> | CPU20% - 32% <> GPU86% - 94% <> | CPU19% - 29% <> GPU96% - 100% <> |
| 1440p (2K QHD) | CPU32% - 41% <> GPU72% - 89% <> | CPU32% - 34% <> GPU84% - 91% <> | CPU17% - 32% <> GPU93% - 98% <> | CPU16% - 28% <> GPU100% - 100% |
| 4K (Ultra HD) | CPU50% - 50% GPU70% - 89% <> | CPU41% - 50% <> GPU81% - 90% <> | CPU24% - 50% <> GPU90% - 98% <> | CPU24% - 50% <> GPU98% - 100% <> |
The Ryzen 7 7800X3D + GeForce GTX 1070 (Mobile) pairing runs this title with CPU utilization between 16% and 50% and GPU utilization between 65% and 100%. Ryzen 7 7800X3D keeps significant headroom across presets, while GeForce GTX 1070 (Mobile) carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 86% at 1080p to 90% at 4K, while CPU averages move from 31% to 43%.
From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) Ultra, the GeForce GTX 1070 (Mobile) averages 100% usage (100-100%), while the Ryzen 7 7800X3D stays at 22% (16-28%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 31% and GPU 86%. At 1440p, that shifts to CPU 29% and GPU 91%, and at 4K it reaches CPU 43% and GPU 90%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1440p (2K QHD) Medium is the most balanced preset based on this dataset. It runs around CPU 33% (32-34%) and GPU 88% (84-91%), which keeps GeForce GTX 1070 (Mobile) well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The GeForce GTX 1070 (Mobile) reaches 100% average load at 1440p (2K QHD) Ultra while the Ryzen 7 7800X3D still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 94% below recommended and your GPU is 36% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+94%vsrecommended
-36%vsrecommended
+478%vsminimum
+9%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce GTX 1070 (Mobile) can run Baldur's Gate 3 smoothly up to 1080p achieving around 85 FPS at Ultra quality. Your GPU is 36% below the recommended specs, and your CPU is 94% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Baldur's Gate 3, upgrading the GPU would give you the most noticeable improvement. The GeForce GTX 1070 (Mobile) is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Baldur's Gate 3 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Baldur's Gate 3 requires at minimum a Core i5-4690 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 150 GB (SSD) storage. For the recommended experience, you need a Core i7-8700K and GeForce RTX 2060 Super with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Baldur's Gate 3 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
