Returning to compete with Battlefield, Delta Force uses a modern engine featuring environmental destruction. While minimum requirements are accessible (GTX 960), competitive settings scale up to require GTX 10/RTX 20 series GPUs and 16GB of RAM for the best experience.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 75 FPS. At 1440p, frame rates range from 55 to 80 FPS. At 4K, frame rates range from 35 to 57 FPS.
The GeForce GTX 1070 Ti is 60% above the recommended GPU (GeForce GTX 1060 5GB) for Delta Force. The Ryzen 7 7800X3D is 278% above the recommended CPU (Core i5-6500).
Delta Force supports: DLSS Frame Gen, AFMF. However, the GeForce GTX 1070 Ti is not compatible with these technologies.
The GeForce GTX 1070 Ti sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $483. At 1080p Ultra, this combo delivers 75 FPS, equivalent to 0.16 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.246 fps/$ | 0.205 fps/$ | 0.166 fps/$ | 0.155 fps/$ |
| 1440p | 0.166 fps/$ | 0.143 fps/$ | 0.126 fps/$ | 0.114 fps/$ |
| 4k | 0.118 fps/$ | 0.114 fps/$ | 0.095 fps/$ | 0.072 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p ultra, the GeForce GTX 1070 Ti sets the ceiling at about 51 FPS, while the Ryzen 7 7800X3D has headroom up to 196 FPS. In this scenario, the GPU limits the CPU potential by 74% (FPS gap: 145 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce GTX 1070 Ti is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 50% | GPU Limits CPU 58% | GPU Limits CPU 66% | GPU Limits CPU 70% |
| 1440p (2K QHD) | GPU Limits CPU 64% | GPU Limits CPU 70% | GPU Limits CPU 73% | GPU Limits CPU 74% |
| 4K (Ultra HD) | GPU Limits CPU 65% | GPU Limits CPU 67% | GPU Limits CPU 69% | GPU Limits CPU 70% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 278% above and your GPU is 60% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+278%vsrecommended
+60%vsrecommended
+729%vsminimum
+139%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce GTX 1070 Ti can run Delta Force smoothly up to 1080p achieving around 75 FPS at Ultra quality. Your GPU is 60% above the recommended specs, and your CPU is 278% above the recommended requirements.
This CPU + GPU combo costs approximately $483 ($384 CPU (Rank #212 Value) + $99 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance.
For Delta Force, upgrading the GPU would give you the most noticeable improvement. The GeForce GTX 1070 Ti is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Delta Force supports DLSS Frame Gen and AFMF, but your GeForce GTX 1070 Ti is not compatible with all of them. Frame Generation is typically available on newer GPUs like the RTX 40-series (DLSS 3) or modern AMD cards (FSR 3).
Delta Force requires at minimum a Core i3-4150 (CPU) and GeForce GTX 960 (GPU) with 12 GB RAM and 50 GB storage. For the recommended experience, you need a Core i5-6500 and GeForce GTX 1060 5GB with 16 GB RAM. Your Ryzen 7 7800X3D and GeForce GTX 1070 Ti both exceed the recommended specs, so you're well-positioned for a great experience.
These Delta Force FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
