A true test for system memory. Procedural maps can exhaust RAM quickly; 16GB is the minimum, and 32GB is recommended. CPUs with 3D V-Cache (AMD X3D) offer massive performance gains here.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 15 to 36 FPS depending on quality settings. At 1440p, frame rates range from 12 to 26 FPS. At 4K, frame rates range from 5 to 10 FPS.
The GeForce GTX 1650 Ti is 32% below recommended, but 36% above minimum for Rust. The Ryzen 7 7800X3D is 180% above the recommended CPU (Core i7-4790K).
Rust supports: AFMF. This game does not have native DLSS 3 or FSR 3 Frame Generation support. AFMF is AMD-exclusive and not compatible with GeForce GTX 1650 Ti.
The GeForce GTX 1650 Ti sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $461. At 1080p Ultra, this combo delivers 15 FPS, equivalent to 0.03 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.078 fps/$ | 0.056 fps/$ | 0.037 fps/$ | 0.033 fps/$ |
| 1440p | 0.056 fps/$ | 0.041 fps/$ | 0.026 fps/$ | 0.026 fps/$ |
| 4k | 0.022 fps/$ | 0.015 fps/$ | 0.011 fps/$ | 0.011 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k medium, the GeForce GTX 1650 Ti sets the ceiling at about 8 FPS, while the Ryzen 7 7800X3D has headroom up to 133 FPS. In this scenario, the GPU limits the CPU potential by 94% (FPS gap: 125 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce GTX 1650 Ti is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 84% | GPU Limits CPU 88% | GPU Limits CPU 91% | GPU Limits CPU 90% |
| 1440p (2K QHD) | GPU Limits CPU 88% | GPU Limits CPU 91% | GPU Limits CPU 92% | GPU Limits CPU 91% |
| 4K (Ultra HD) | GPU Limits CPU 92% | GPU Limits CPU 94% | GPU Limits CPU 94% | GPU Limits CPU 94% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 180% below recommended and your GPU is 32% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+180%vsrecommended
-32%vsrecommended
+236%vsminimum
+36%vsminimum
The Ryzen 7 7800X3D and GeForce GTX 1650 Ti will struggle to run Rust at smooth framerates. At 1080p Ultra, you can expect around 15 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $461 ($384 CPU (Rank #212 Value) + $77 GPU (Rank #35 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the GPU. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance.
For Rust, upgrading the GPU would give you the most noticeable improvement. The GeForce GTX 1650 Ti is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Rust supports AFMF, but your GeForce GTX 1650 Ti is not compatible with these technologies. Frame Generation is typically available on newer GPUs like the RTX 40-series (DLSS 3) or modern AMD cards (FSR 3).
Rust requires at minimum a Core i7-3770 (CPU) and GeForce GTX 670 (GPU) with 10 GB RAM and 25 GB (SSD) storage. For the recommended experience, you need a Core i7-4790K and GeForce GTX 980 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Rust FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
