Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 67 FPS. At 1440p, all settings exceed 67 FPS. At 4K, frame rates range from 48 to 84 FPS.
The GeForce GTX 1660 SUPER is 26% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Ryzen 7 7800X3D is 161% above the recommended CPU (Core i7-7700).
Naraka: Bladepoint supports: DLSS Frame Gen, FSR 3 Frame Gen, AFMF. The GeForce GTX 1660 SUPER can use FSR 3 Frame Gen, providing up to 1.5x-2x frame rate boost.
The GeForce GTX 1660 SUPER sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $494. At 1080p Ultra, this combo delivers 67 FPS, equivalent to 0.14 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.318 fps/$ | 0.241 fps/$ | 0.180 fps/$ | 0.136 fps/$ |
| 1440p | 0.277 fps/$ | 0.223 fps/$ | 0.172 fps/$ | 0.136 fps/$ |
| 4k | 0.170 fps/$ | 0.152 fps/$ | 0.117 fps/$ | 0.097 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the GeForce GTX 1660 SUPER sets the ceiling at about 52 FPS, while the Ryzen 7 7800X3D has headroom up to 115 FPS. In this scenario, the GPU limits the CPU potential by 55% (FPS gap: 63 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce GTX 1660 SUPER is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 18% | GPU Limits CPU 8% | GPU Limits CPU 11% | GPU Limits CPU 35% |
| 1440p (2K QHD) | GPU Limits CPU 29% | GPU Limits CPU 19% | GPU Limits CPU 24% | GPU Limits CPU 41% |
| 4K (Ultra HD) | GPU Limits CPU 47% | GPU Limits CPU 44% | GPU Limits CPU 47% | GPU Limits CPU 55% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 161% above and your GPU is 26% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+161%vsrecommended
+26%vsrecommended
+598%vsminimum
+225%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce GTX 1660 SUPER can run Naraka: Bladepoint smoothly up to 1440p achieving around 67 FPS at Ultra quality. Your GPU is 26% above the recommended specs, and your CPU is 161% above the recommended requirements.
This CPU + GPU combo costs approximately $494 ($384 CPU (Rank #212 Value) + $110 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance.
For Naraka: Bladepoint, upgrading the GPU would give you the most noticeable improvement. The GeForce GTX 1660 SUPER is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! Naraka: Bladepoint supports DLSS Frame Gen and FSR 3 Frame Gen and AFMF, and your GeForce GTX 1660 SUPER is compatible with FSR 3 Frame Gen. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your Ryzen 7 7800X3D and GeForce GTX 1660 SUPER both exceed the recommended specs, so you're well-positioned for a great experience.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
