A dense RPG where Act 3 becomes a CPU stress test due to the high number of NPCs. An SSD is vital for loading times. 16GB of RAM is recommended, and the game benefits greatly from upscaling tech like DLSS and FSR.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 43 to 99 FPS depending on quality settings. At 1440p, frame rates range from 29 to 61 FPS. At 4K, frame rates range from 13 to 27 FPS.
The GeForce GTX 780 Ti is 2% below minimum GPU requirement for Baldur's Gate 3. The Ryzen 7 7800X3D is 94% above the recommended CPU (Core i7-8700K).
Baldur's Gate 3 supports: AFMF. This game does not have native DLSS 3 or FSR 3 Frame Generation support. AFMF is AMD-exclusive and not compatible with GeForce GTX 780 Ti.
The GeForce GTX 780 Ti sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $426. At 1080p Ultra, this combo delivers 43 FPS, equivalent to 0.1 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.232 fps/$ | 0.178 fps/$ | 0.148 fps/$ | 0.101 fps/$ |
| 1440p | 0.143 fps/$ | 0.106 fps/$ | 0.094 fps/$ | 0.068 fps/$ |
| 4k | 0.063 fps/$ | 0.047 fps/$ | 0.040 fps/$ | 0.031 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k high, the GeForce GTX 780 Ti sets the ceiling at about 13 FPS, while the Ryzen 7 7800X3D has headroom up to 114 FPS. In this scenario, the GPU limits the CPU potential by 89% (FPS gap: 101 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce GTX 780 Ti is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 56% | GPU Limits CPU 63% | GPU Limits CPU 65% | GPU Limits CPU 73% |
| 1440p (2K QHD) | GPU Limits CPU 67% | GPU Limits CPU 73% | GPU Limits CPU 73% | GPU Limits CPU 77% |
| 4K (Ultra HD) | GPU Limits CPU 85% | GPU Limits CPU 88% | GPU Limits CPU 89% | GPU Limits CPU 89% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. GPU is the limiting factor (2% below minimum). Expect performance issues. Low settings recommended.
+94%vsrecommended
-43%vsrecommended
+478%vsminimum
-2%vsminimum
The Ryzen 7 7800X3D and GeForce GTX 780 Ti will struggle to run Baldur's Gate 3 at smooth framerates. At 1080p Ultra, you can expect around 43 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $426 ($384 CPU (Rank #212 Value) + $42 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance.
For Baldur's Gate 3, upgrading the GPU would give you the most noticeable improvement. The GeForce GTX 780 Ti is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Baldur's Gate 3 supports AFMF, but your GeForce GTX 780 Ti is not compatible with these technologies. Frame Generation is typically available on newer GPUs like the RTX 40-series (DLSS 3) or modern AMD cards (FSR 3).
Baldur's Gate 3 requires at minimum a Core i5-4690 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 150 GB (SSD) storage. For the recommended experience, you need a Core i7-8700K and GeForce RTX 2060 Super with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Baldur's Gate 3 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
