Naraka: BladepointFPS onRyzen 7 7800X3D&GeForce GTX TITAN Z

Naraka: Bladepoint

Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.

Naraka: Bladepoint - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low171 FPS
medium125 FPS
high99 FPS
ultra78 FPS
1440P
low139 FPS
medium109 FPS
high88 FPS
ultra69 FPS
4K
low74 FPS
medium66 FPS
high56 FPS
ultra47 FPS

Performance Report

Naraka: Bladepoint

GeForce GTX TITAN Z + Ryzen 7 7800X3D
🎮Visual Experience

At 1080p, all quality settings exceed 78 FPS. At 1440p, all settings exceed 69 FPS. At 4K, frame rates range from 47 to 74 FPS.

Official Requirements

The GeForce GTX TITAN Z is 12% below recommended, but 126% above minimum for Naraka: Bladepoint. The Ryzen 7 7800X3D is 161% above the recommended CPU (Core i7-7700).

AI Acceleration

Naraka: Bladepoint supports: DLSS Frame Gen, FSR 3 Frame Gen, AFMF. The GeForce GTX TITAN Z can use FSR 3 Frame Gen, providing up to 1.5x-2x frame rate boost.

⚙️FPS Ceiling Analysis

The GeForce GTX TITAN Z sets the FPS ceiling at 1080p (low/ultra), all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom. The FPS ceiling is closely matched at 1080p (medium/high).

💰Value Analysis

Approximated average price on current market:

GeForce GTX TITAN Z:$400(updated 2/6/2026)
Official Launch Price: $2999
Ryzen 7 7800X3D:$384(updated 2/6/2026)
Official Launch Price: $449

Combo price: $784. At 1080p Ultra, this combo delivers 78 FPS, equivalent to 0.1 FPS per dollar.

ResolutionLowMediumHighUltra
1080p0.218 fps/$0.159 fps/$0.126 fps/$0.099 fps/$
1440p0.177 fps/$0.139 fps/$0.112 fps/$0.088 fps/$
4k0.094 fps/$0.084 fps/$0.071 fps/$0.060 fps/$

* Table values represent FPS per Dollar (higher is better)

Performance Limiter Analysis

Ryzen 7 7800X3D|GeForce GTX TITAN Z

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.

📈Analysis

At 4k ultra, the GeForce GTX TITAN Z sets the ceiling at about 51 FPS, while the Ryzen 7 7800X3D has headroom up to 115 FPS. In this scenario, the GPU limits the CPU potential by 56% (FPS gap: 64 FPS). Overall distribution: GPU limits 10/12 cells, CPU limits 0/12, balanced 2/12.

Verdict

GPU Limits CPU

Your GeForce GTX TITAN Z is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.

🧩Detailed Breakdown
1080p (Full HD)
LowGPU Limits CPU 8%
MediumBalanced
HighBalanced
UltraGPU Limits CPU 21%
1440p (2K QHD)
LowGPU Limits CPU 23%
MediumGPU Limits CPU 17%
HighGPU Limits CPU 15%
UltraGPU Limits CPU 35%
4K (Ultra HD)
LowGPU Limits CPU 53%
MediumGPU Limits CPU 51%
HighGPU Limits CPU 49%
UltraGPU Limits CPU 56%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

Naraka: Bladepoint Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Ryzen 7 7800X3D
cpu icon
34,293
Your Score
MinimumCore i5-4460
RecommendedCore i7-7700
GPU - GeForce GTX TITAN Z
gpu icon
8,811
Your Score
MinimumGeForce GTX 750 Ti
RecommendedGeForce GTX 1060

Your CPU is 161% below recommended and your GPU is 12% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.

CPU

+161%vsrecommended

GPU

-12%vsrecommended

CPU

+598%vsminimum

GPU

+126%vsminimum

Minimum Requirements
Video Card: GeForce GTX 750 Ti
Processor: Core i5-4460
Memory: 8 GB
Disk Space: 20 GB
System: Windows 10 64-bit
Recommended Requirements
Video Card: GeForce GTX 1060
Processor: Core i7-7700
Memory: 16 GB
Disk Space: 20 GB (SSD)
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Ryzen 7 7800X3D and GeForce GTX TITAN Z run Naraka: Bladepoint well?

Yes, the Ryzen 7 7800X3D paired with the GeForce GTX TITAN Z can run Naraka: Bladepoint smoothly up to 1440p achieving around 69 FPS at Ultra quality. Your GPU is 12% below the recommended specs, and your CPU is 161% above the recommended requirements.

2Is there a more cost-effective setup to run Naraka: Bladepoint?

This CPU + GPU combo costs approximately $784 ($384 CPU (Rank #212 Value) + $400 GPU). Your GeForce GTX TITAN Z is currently the main performance bottleneck and its market value ($400) is actually higher than newer, faster alternatives. Trading it or upgrading could yield immediate profit and performance gains. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance while costing less than your current GPU.

3Which component should I upgrade first to improve Naraka: Bladepoint performance?

For Naraka: Bladepoint, upgrading the GPU would give you the most noticeable improvement. The GeForce GTX TITAN Z is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.

4Does this setup support Frame Generation for Naraka: Bladepoint?

Yes! Naraka: Bladepoint supports DLSS Frame Gen and FSR 3 Frame Gen and AFMF, and your GeForce GTX TITAN Z is compatible with FSR 3 Frame Gen. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.

5What are the minimum and recommended specs for Naraka: Bladepoint?

Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.

6How accurate are these Naraka: Bladepoint FPS estimates for the Ryzen 7 7800X3D and GeForce GTX TITAN Z?

These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.