This 'Pokémon with guns' survival game runs on Unreal Engine. It is CPU-heavy due to AI simulation for the many creatures. Memory leaks can occur in long sessions, making 16GB of RAM a practical minimum.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 73 FPS. At 1440p, frame rates range from 56 to 82 FPS. At 4K, frame rates range from 26 to 45 FPS.
The GeForce GTX TITAN Z is 46% below recommended, but 75% above minimum for Palworld. The Ryzen 7 7800X3D is 53% above the recommended CPU (Core i9-9900K).
Palworld supports: AFMF. This game does not have native DLSS 3 or FSR 3 Frame Generation support. AFMF is AMD-exclusive and not compatible with GeForce GTX TITAN Z.
The GeForce GTX TITAN Z sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $784. At 1080p Ultra, this combo delivers 73 FPS, equivalent to 0.09 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.168 fps/$ | 0.128 fps/$ | 0.117 fps/$ | 0.093 fps/$ |
| 1440p | 0.105 fps/$ | 0.085 fps/$ | 0.083 fps/$ | 0.071 fps/$ |
| 4k | 0.057 fps/$ | 0.048 fps/$ | 0.041 fps/$ | 0.033 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k high, the GeForce GTX TITAN Z sets the ceiling at about 34 FPS, while the Ryzen 7 7800X3D has headroom up to 132 FPS. In this scenario, the GPU limits the CPU potential by 74% (FPS gap: 98 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce GTX TITAN Z is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 56% | GPU Limits CPU 61% | GPU Limits CPU 57% | GPU Limits CPU 62% |
| 1440p (2K QHD) | GPU Limits CPU 70% | GPU Limits CPU 72% | GPU Limits CPU 70% | GPU Limits CPU 71% |
| 4K (Ultra HD) | GPU Limits CPU 71% | GPU Limits CPU 73% | GPU Limits CPU 74% | GPU Limits CPU 72% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 53% below recommended and your GPU is 46% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+53%vsrecommended
-46%vsrecommended
+344%vsminimum
+75%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce GTX TITAN Z can run Palworld smoothly up to 1080p achieving around 73 FPS at Ultra quality. Your GPU is 46% below the recommended specs, and your CPU is 53% above the recommended requirements.
This CPU + GPU combo costs approximately $784 ($384 CPU (Rank #212 Value) + $400 GPU). Your GeForce GTX TITAN Z is currently the main performance bottleneck and its market value ($400) is actually higher than newer, faster alternatives. Trading it or upgrading could yield immediate profit and performance gains. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance while costing less than your current GPU.
For Palworld, upgrading the GPU would give you the most noticeable improvement. The GeForce GTX TITAN Z is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Palworld supports AFMF, but your GeForce GTX TITAN Z is not compatible with these technologies. Frame Generation is typically available on newer GPUs like the RTX 40-series (DLSS 3) or modern AMD cards (FSR 3).
Palworld requires at minimum a Core i5-3570K (CPU) and GeForce GTX 1050 (GPU) with 16 GB RAM and 40 GB (SSD) storage. For the recommended experience, you need a Core i9-9900K and GeForce RTX 2070 with 32 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Palworld FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
