Bethesda's Creation Engine 2 is CPU-dependent, especially in cities, and requires an SSD for asset streaming. Optimization tends to favor AMD slightly, but generally requires powerful hardware to run smoothly.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 64 FPS. At 1440p, frame rates range from 56 to 90 FPS. At 4K, frame rates range from 38 to 60 FPS.
The GeForce GTX TITAN Z is 40% below minimum GPU requirement for Starfield. The Ryzen 7 7800X3D is 89% above the recommended CPU (Core i5-10600K).
Starfield supports: FSR 3 Frame Gen, AFMF. The GeForce GTX TITAN Z can use FSR 3 Frame Gen, providing up to 1.5x-2x frame rate boost.
The GeForce GTX TITAN Z sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $784. At 1080p Ultra, this combo delivers 64 FPS, equivalent to 0.08 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.136 fps/$ | 0.105 fps/$ | 0.091 fps/$ | 0.082 fps/$ |
| 1440p | 0.115 fps/$ | 0.091 fps/$ | 0.082 fps/$ | 0.071 fps/$ |
| 4k | 0.077 fps/$ | 0.063 fps/$ | 0.055 fps/$ | 0.048 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p medium, the GeForce GTX TITAN Z sets the ceiling at about 68 FPS, while the Ryzen 7 7800X3D has headroom up to 201 FPS. In this scenario, the GPU limits the CPU potential by 66% (FPS gap: 133 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce GTX TITAN Z is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 53% | GPU Limits CPU 60% | GPU Limits CPU 60% | GPU Limits CPU 59% |
| 1440p (2K QHD) | GPU Limits CPU 60% | GPU Limits CPU 66% | GPU Limits CPU 66% | GPU Limits CPU 65% |
| 4K (Ultra HD) | GPU Limits CPU 48% | GPU Limits CPU 54% | GPU Limits CPU 53% | GPU Limits CPU 51% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. GPU is the limiting factor (40% below minimum). Expect performance issues. Low settings recommended.
+89%vsrecommended
-65%vsrecommended
+147%vsminimum
-40%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce GTX TITAN Z can run Starfield smoothly up to 1080p achieving around 64 FPS at Ultra quality. Your GPU is 65% below the recommended specs, and your CPU is 89% above the recommended requirements.
This CPU + GPU combo costs approximately $784 ($384 CPU (Rank #212 Value) + $400 GPU). Your GeForce GTX TITAN Z is currently the main performance bottleneck and its market value ($400) is actually higher than newer, faster alternatives. Trading it or upgrading could yield immediate profit and performance gains. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance while costing less than your current GPU.
For Starfield, upgrading the GPU would give you the most noticeable improvement. The GeForce GTX TITAN Z is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! Starfield supports FSR 3 Frame Gen and AFMF, and your GeForce GTX TITAN Z is compatible with FSR 3 Frame Gen. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Starfield requires at minimum a Core i7-6800K (CPU) and GeForce GTX 1070 Ti (GPU) with 16 GB RAM and 125 GB (SSD Obrigatório) storage. For the recommended experience, you need a Core i5-10600K and GeForce RTX 2080 with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Starfield FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
