Uses the stable Tiger engine. It has dropped support for older OSs and requires significant storage space. A decent CPU is needed for raids and activities with many enemies.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 19 to 52 FPS depending on quality settings. At 1440p, frame rates range from 17 to 42 FPS. At 4K, frame rates range from 10 to 23 FPS.
The GeForce MX450 is 8% below minimum GPU requirement for Destiny 2. The Ryzen 7 7800X3D is 164% above the recommended CPU (Core i5-2400).
The GeForce MX450 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $584. At 1080p Ultra, this combo delivers 19 FPS, equivalent to 0.03 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.089 fps/$ | 0.062 fps/$ | 0.045 fps/$ | 0.033 fps/$ |
| 1440p | 0.072 fps/$ | 0.051 fps/$ | 0.038 fps/$ | 0.029 fps/$ |
| 4k | 0.039 fps/$ | 0.027 fps/$ | 0.022 fps/$ | 0.017 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k high, the GeForce MX450 sets the ceiling at about 18 FPS, while the Ryzen 7 7800X3D has headroom up to 100 FPS. In this scenario, the GPU limits the CPU potential by 82% (FPS gap: 82 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce MX450 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 69% | GPU Limits CPU 71% | GPU Limits CPU 75% | GPU Limits CPU 77% |
| 1440p (2K QHD) | GPU Limits CPU 69% | GPU Limits CPU 73% | GPU Limits CPU 78% | GPU Limits CPU 77% |
| 4K (Ultra HD) | GPU Limits CPU 76% | GPU Limits CPU 78% | GPU Limits CPU 82% | GPU Limits CPU 81% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU66% - 90% <> GPU71% - 79% <> | CPU66% - 90% <> GPU71% - 79% <> | CPU61% - 90% <> GPU77% - 94% <> | CPU54% - 83% <> GPU84% - 94% <> |
| 1440p (2K QHD) | CPU66% - 90% <> GPU78% - 80% <> | CPU66% - 90% <> GPU78% - 80% <> | CPU57% - 90% <> GPU90% - 97% <> | CPU50% - 83% <> GPU97% - 97% |
| 4K (Ultra HD) | CPU66% - 89% <> GPU79% - 80% <> | CPU66% - 89% <> GPU79% - 80% <> | CPU55% - 87% <> GPU92% - 96% <> | CPU48% - 82% <> GPU96% - 99% <> |
The Ryzen 7 7800X3D + GeForce MX450 pairing runs this title with CPU utilization between 48% and 90% and GPU utilization between 71% and 99%. Ryzen 7 7800X3D stays in a controlled operating range, while GeForce MX450 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 81% at 1080p to 88% at 4K, while CPU averages move from 75% to 73%.
The utilization pattern is relatively even. The GeForce MX450 reaches 98% average at its highest-load preset, while the Ryzen 7 7800X3D peaks at 78% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 75% and GPU 81%. At 1440p, that shifts to CPU 74% and GPU 87%, and at 4K it reaches CPU 73% and GPU 88%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 68% (54-83%) and GPU 89% (84-94%), which keeps GeForce MX450 well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 7 7800X3D and GeForce MX450 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. GPU is the limiting factor (8% below minimum). Expect performance issues. Low settings recommended.
+164%vsrecommended
-61%vsrecommended
+977%vsminimum
-8%vsminimum
The Ryzen 7 7800X3D and GeForce MX450 will struggle to run Destiny 2 at smooth framerates. At 1080p Ultra, you can expect around 19 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $584 ($384 CPU + $200 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce GTX 1080 SLI (móvel) (Rank #2 for value) could deliver noticeably better performance.
For Destiny 2, upgrading the GPU would give you the most noticeable improvement. The GeForce MX450 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Destiny 2 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Destiny 2 requires at minimum a Core i3-3250 (CPU) and GeForce GTX 660 (GPU) with 6 GB RAM and 105 GB storage. For the recommended experience, you need a Core i5-2400 and GeForce GTX 970 with 8 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Destiny 2 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
