An asymmetrical horror game locked at 60 FPS. It is generally GPU-limited at high settings but runs on most mid-range hardware.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 75 FPS. At 1440p, frame rates range from 51 to 72 FPS. At 4K, frame rates range from 31 to 54 FPS.
The GeForce MX570 is 19% above the recommended GPU (GeForce GTX 760) for Dead by Daylight. The Ryzen 7 7800X3D is 543% above the recommended CPU (Core i3-4170).
The GeForce MX570 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $504. At 1080p Ultra, this combo delivers 75 FPS, equivalent to 0.15 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.208 fps/$ | 0.198 fps/$ | 0.194 fps/$ | 0.149 fps/$ |
| 1440p | 0.143 fps/$ | 0.135 fps/$ | 0.135 fps/$ | 0.101 fps/$ |
| 4k | 0.107 fps/$ | 0.105 fps/$ | 0.103 fps/$ | 0.062 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the GeForce MX570 sets the ceiling at about 30 FPS, while the Ryzen 7 7800X3D has headroom up to 117 FPS. In this scenario, the GPU limits the CPU potential by 74% (FPS gap: 87 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce MX570 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 54% | GPU Limits CPU 60% | GPU Limits CPU 60% | GPU Limits CPU 70% |
| 1440p (2K QHD) | GPU Limits CPU 44% | GPU Limits CPU 50% | GPU Limits CPU 51% | GPU Limits CPU 65% |
| 4K (Ultra HD) | GPU Limits CPU 53% | GPU Limits CPU 58% | GPU Limits CPU 60% | GPU Limits CPU 74% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU28% - 39% <> GPU50% - 69% <> | CPU28% - 39% <> GPU50% - 69% <> | CPU30% - 45% <> GPU70% - 85% <> | CPU19% - 32% <> GPU73% - 84% <> |
| 1440p (2K QHD) | CPU19% - 38% <> GPU50% - 82% <> | CPU19% - 38% <> GPU50% - 82% <> | CPU21% - 38% <> GPU70% - 98% <> | CPU10% - 25% <> GPU72% - 97% <> |
| 4K (Ultra HD) | CPU20% - 38% <> GPU50% - 82% <> | CPU20% - 38% <> GPU50% - 82% <> | CPU21% - 38% <> GPU70% - 97% <> | CPU9% - 25% <> GPU74% - 96% <> |
The Ryzen 7 7800X3D + GeForce MX570 pairing runs this title with CPU utilization between 9% and 45% and GPU utilization between 50% and 98%. Ryzen 7 7800X3D keeps significant headroom across presets, while GeForce MX570 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 69% at 1080p to 75% at 4K, while CPU averages move from 33% to 26%.
The utilization pattern is relatively even. The GeForce MX570 reaches 85% average at its highest-load preset, while the Ryzen 7 7800X3D peaks at 38% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 33% and GPU 69%. At 1440p, that shifts to CPU 26% and GPU 75%, and at 4K it reaches CPU 26% and GPU 75%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
4K (Ultra HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 17% (9-25%) and GPU 85% (74-96%), which keeps GeForce MX570 well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 7 7800X3D and GeForce MX570 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 543% above and your GPU is 19% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+543%vsrecommended
+19%vsrecommended
+420%vsminimum
+152%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce MX570 can run Dead by Daylight smoothly up to 1080p achieving around 75 FPS at Ultra quality. Your GPU is 19% above the recommended specs, and your CPU is 543% above the recommended requirements.
This CPU + GPU combo costs approximately $504 ($384 CPU (Rank #212 Value) + $120 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce GTX 1080 SLI (móvel) (Rank #2 for value) could deliver noticeably better performance.
For Dead by Daylight, upgrading the GPU would give you the most noticeable improvement. The GeForce MX570 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Dead by Daylight does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Dead by Daylight requires at minimum a Core i3-4170 (CPU) and GeForce GTX 460 (GPU) with 8 GB RAM and 50 GB storage. For the recommended experience, you need a Core i3-4170 and GeForce GTX 760 with 8 GB RAM. Your Ryzen 7 7800X3D and GeForce MX570 both exceed the recommended specs, so you're well-positioned for a great experience.
These Dead by Daylight FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
