Once HumanFPS onRyzen 7 7800X3D&GeForce RTX 2080 Ti

Once Human

A continuous open world with player-built structures creates a heavy streaming load. It scales well but recommends 6GB+ VRAM for higher settings.

Once Human - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low201 FPS
medium165 FPS
high140 FPS
ultra129 FPS
1440P
low190 FPS
medium163 FPS
high143 FPS
ultra128 FPS
4K
low140 FPS
medium126 FPS
high103 FPS
ultra89 FPS

Performance Report

Once Human

GeForce RTX 2080 Ti + Ryzen 7 7800X3D
🎮Visual Experience

At 1080p, all quality settings exceed 129 FPS. At 1440p, all settings exceed 128 FPS. At 4K, all settings exceed 89 FPS.

Official Requirements

The GeForce RTX 2080 Ti is 114% above the recommended GPU (GeForce GTX 1060) for Once Human. The Ryzen 7 7800X3D is 180% above the recommended CPU (Core i7-7700).

⚙️FPS Ceiling Analysis

At lower resolutions (1080p low, 1440p (low/medium), all 4k settings), the Ryzen 7 7800X3D sets the FPS ceiling. As graphical load increases at (1080p ultra), the GeForce RTX 2080 Ti becomes the FPS-limiting side. The FPS ceiling is closely matched at 1080p (medium/high), 1440p (high/ultra).

💰Value Analysis

Approximated average price on current market:

GeForce RTX 2080 Ti:$600(updated 2/6/2026)
Official Launch Price: $999
Ryzen 7 7800X3D:$384(updated 2/6/2026)
Official Launch Price: $449

Combo price: $984. At 1080p Ultra, this combo delivers 129 FPS, equivalent to 0.13 FPS per dollar.

ResolutionLowMediumHighUltra
1080p0.204 fps/$0.168 fps/$0.142 fps/$0.131 fps/$
1440p0.193 fps/$0.166 fps/$0.145 fps/$0.130 fps/$
4k0.142 fps/$0.128 fps/$0.105 fps/$0.090 fps/$

* Table values represent FPS per Dollar (higher is better)

Performance Limiter Analysis

Ryzen 7 7800X3D|GeForce RTX 2080 Ti

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.

📈Analysis

At 4k medium, the Ryzen 7 7800X3D sets the ceiling at about 135 FPS, while the GeForce RTX 2080 Ti could reach 162 FPS. In this scenario, the CPU limits the GPU potential by 17% (FPS gap: 27 FPS). Overall distribution: CPU limits 7/12 cells, GPU limits 1/12, balanced 4/12.

Verdict

CPU Limits GPU

Your Ryzen 7 7800X3D is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 2080 Ti rendering potential remains unused in those settings.

🧩Detailed Breakdown
1080p (Full HD)
LowCPU Limits GPU 12%
MediumBalanced
HighBalanced
UltraGPU Limits CPU 7%
1440p (2K QHD)
LowCPU Limits GPU 15%
MediumCPU Limits GPU 10%
HighBalanced
UltraBalanced
4K (Ultra HD)
LowCPU Limits GPU 16%
MediumCPU Limits GPU 17%
HighCPU Limits GPU 10%
UltraCPU Limits GPU 9%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for Ryzen 7 7800X3D and GeForce RTX 2080 Ti

1080p (Full HD)

Low
CPU55% - 90%
<>
GPU49% - 69%
<>
Medium
CPU55% - 90%
<>
GPU49% - 69%
<>
High
CPU55% - 63%
<>
GPU67% - 82%
<>
Ultra
CPU55% - 63%
<>
GPU67% - 82%
<>

1440p (2K QHD)

Low
CPU57% - 69%
<>
GPU54% - 75%
<>
Medium
CPU57% - 69%
<>
GPU54% - 75%
<>
High
CPU44% - 57%
<>
GPU76% - 88%
<>
Ultra
CPU44% - 57%
<>
GPU76% - 88%
<>

4K (Ultra HD)

Low
CPU41% - 69%
<>
GPU54% - 75%
<>
Medium
CPU41% - 69%
<>
GPU54% - 75%
<>
High
CPU41% - 41%
GPU75% - 88%
<>
Ultra
CPU41% - 41%
GPU75% - 88%
<>

Performance Summary

The Ryzen 7 7800X3D + GeForce RTX 2080 Ti pairing runs this title with CPU utilization between 41% and 90% and GPU utilization between 49% and 88%. Ryzen 7 7800X3D stays in a controlled operating range, while GeForce RTX 2080 Ti is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 67% at 1080p to 73% at 4K, while CPU averages move from 66% to 48%.

Load Interpretation

The utilization pattern is relatively even. The GeForce RTX 2080 Ti reaches 82% average at its highest-load preset, while the Ryzen 7 7800X3D peaks at 72% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.

Resolution Scaling

At 1080p, averages sit around CPU 66% and GPU 67%. At 1440p, that shifts to CPU 57% and GPU 73%, and at 4K it reaches CPU 48% and GPU 73%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.

Optimal Settings Recommendation

1440p (2K QHD) High is the most balanced preset based on this dataset. It runs around CPU 50% (44-57%) and GPU 82% (76-88%), which keeps GeForce RTX 2080 Ti well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.

Upgrade Insight

Current utilization does not show an urgent upgrade requirement for either component; the Ryzen 7 7800X3D and GeForce RTX 2080 Ti remain reasonably matched for this title.

Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.

Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.

  • High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
  • High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
  • Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

Once Human Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Ryzen 7 7800X3D
cpu icon
34,293
Your Score
MinimumCore i5-4460
RecommendedCore i7-7700
GPU - GeForce RTX 2080 Ti
gpu icon
21,513
Your Score
MinimumGeForce GTX 750 Ti
RecommendedGeForce GTX 1060

Your CPU is 180% above and your GPU is 114% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.

CPU

+180%vsrecommended

GPU

+114%vsrecommended

CPU

+435%vsminimum

GPU

+452%vsminimum

Minimum Requirements
Video Card: GeForce GTX 750 Ti
Processor: Core i5-4460
Memory: 8 GB
Disk Space: 55 GB
System: Windows 10 64-bit
Recommended Requirements
Video Card: GeForce GTX 1060
Processor: Core i7-7700
Memory: 16 GB
Disk Space: 55 GB
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Ryzen 7 7800X3D and GeForce RTX 2080 Ti run Once Human well?

Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 2080 Ti can run Once Human smoothly up to 4k achieving around 89 FPS at Ultra quality. Your GPU is 114% above the recommended specs, and your CPU is 180% above the recommended requirements.

2Is there a more cost-effective setup to run Once Human?

This CPU + GPU combo costs approximately $984 ($384 CPU (Rank #212 Value) + $600 GPU). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).

3Which component should I upgrade first to improve Once Human performance?

For Once Human, upgrading the CPU would have the biggest impact on performance. The Ryzen 7 7800X3D is currently the limiting factor — the GeForce RTX 2080 Ti has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1440p low, 1440p medium, 4k low, 4k medium, 4k high, 4k ultra. GPU-limited at: 1080p ultra.

4Does this setup support Frame Generation for Once Human?

Once Human does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Once Human?

Once Human requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 55 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 2080 Ti both exceed the recommended specs, so you're well-positioned for a great experience.

6How accurate are these Once Human FPS estimates for the Ryzen 7 7800X3D and GeForce RTX 2080 Ti?

These Once Human FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.