A competitor to Overwatch featuring environmental destruction, which makes it CPU heavy. DX12 and 12GB of RAM are the minimum requirements.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 93 FPS. At 1440p, all settings exceed 63 FPS. At 4K, frame rates range from 29 to 59 FPS.
The GeForce RTX 2080 is 13% above the recommended GPU (GeForce RTX 2060 Super) for Marvel Rivals. The Ryzen 7 7800X3D is 57% above the recommended CPU (Core i5-10400).
The GeForce RTX 2080 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $634. At 1080p Ultra, this combo delivers 93 FPS, equivalent to 0.15 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.309 fps/$ | 0.241 fps/$ | 0.189 fps/$ | 0.147 fps/$ |
| 1440p | 0.210 fps/$ | 0.147 fps/$ | 0.118 fps/$ | 0.099 fps/$ |
| 4k | 0.093 fps/$ | 0.058 fps/$ | 0.055 fps/$ | 0.046 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k medium, the GeForce RTX 2080 sets the ceiling at about 42 FPS, while the Ryzen 7 7800X3D has headroom up to 172 FPS. In this scenario, the GPU limits the CPU potential by 76% (FPS gap: 130 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 2080 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 68% | GPU Limits CPU 73% | GPU Limits CPU 72% | GPU Limits CPU 72% |
| 1440p (2K QHD) | GPU Limits CPU 61% | GPU Limits CPU 69% | GPU Limits CPU 69% | GPU Limits CPU 71% |
| 4K (Ultra HD) | GPU Limits CPU 67% | GPU Limits CPU 76% | GPU Limits CPU 75% | GPU Limits CPU 74% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU28% - 68% <> GPU79% - 95% <> | CPU28% - 68% <> GPU86% - 99% <> | CPU28% - 68% <> GPU86% - 99% <> | CPU32% - 69% <> GPU84% - 98% <> |
| 1440p (2K QHD) | CPU23% - 63% <> GPU89% - 98% <> | CPU23% - 63% <> GPU96% - 100% <> | CPU23% - 63% <> GPU96% - 100% <> | CPU23% - 63% <> GPU96% - 100% <> |
| 4K (Ultra HD) | CPU17% - 42% <> GPU89% - 98% <> | CPU17% - 42% <> GPU98% - 100% <> | CPU17% - 42% <> GPU98% - 100% <> | CPU17% - 42% <> GPU98% - 100% <> |
The Ryzen 7 7800X3D + GeForce RTX 2080 pairing runs this title with CPU utilization between 17% and 69% and GPU utilization between 79% and 100%. Ryzen 7 7800X3D keeps significant headroom across presets, while GeForce RTX 2080 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 91% at 1080p to 98% at 4K, while CPU averages move from 49% to 30%.
From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) Medium, the GeForce RTX 2080 averages 99% usage (98-100%), while the Ryzen 7 7800X3D stays at 30% (17-42%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 49% and GPU 91%. At 1440p, that shifts to CPU 43% and GPU 97%, and at 4K it reaches CPU 30% and GPU 98%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) Low is the most balanced preset based on this dataset. It runs around CPU 48% (28-68%) and GPU 87% (79-95%), which keeps GeForce RTX 2080 well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The GeForce RTX 2080 reaches 99% average load at 4K (Ultra HD) Medium while the Ryzen 7 7800X3D still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 57% above and your GPU is 13% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+57%vsrecommended
+13%vsrecommended
+164%vsminimum
+86%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 2080 can run Marvel Rivals smoothly up to 1440p achieving around 63 FPS at Ultra quality. Your GPU is 13% above the recommended specs, and your CPU is 57% above the recommended requirements.
This CPU + GPU combo costs approximately $634 ($384 CPU (Rank #212 Value) + $250 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 5060 Ti for around $379 (Rank #21 for value) could deliver noticeably better performance.
For Marvel Rivals, upgrading the GPU would give you the most noticeable improvement. The GeForce RTX 2080 is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Marvel Rivals does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Marvel Rivals requires at minimum a Core i5-6600K (CPU) and GeForce GTX 1060 (GPU) with 12 GB RAM and 70 GB storage. For the recommended experience, you need a Core i5-10400 and GeForce RTX 2060 Super with 16 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 2080 both exceed the recommended specs, so you're well-positioned for a great experience.
These Marvel Rivals FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
