A dense RPG where Act 3 becomes a CPU stress test due to the high number of NPCs. An SSD is vital for loading times. 16GB of RAM is recommended, and the game benefits greatly from upscaling tech like DLSS and FSR.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 91 FPS. At 1440p, all settings exceed 62 FPS. At 4K, frame rates range from 24 to 55 FPS.
The GeForce RTX 3050 6GB is 35% below recommended, but 12% above minimum for Baldur's Gate 3. The Ryzen 7 7800X3D is 94% above the recommended CPU (Core i7-8700K).
Baldur's Gate 3 supports: AFMF. This game does not have native DLSS 3 or FSR 3 Frame Generation support. AFMF is AMD-exclusive and not compatible with GeForce RTX 3050 6GB.
The GeForce RTX 3050 6GB sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $563. At 1080p Ultra, this combo delivers 91 FPS, equivalent to 0.16 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.321 fps/$ | 0.233 fps/$ | 0.217 fps/$ | 0.162 fps/$ |
| 1440p | 0.222 fps/$ | 0.155 fps/$ | 0.146 fps/$ | 0.110 fps/$ |
| 4k | 0.098 fps/$ | 0.067 fps/$ | 0.060 fps/$ | 0.043 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k medium, the GeForce RTX 3050 6GB sets the ceiling at about 31 FPS, while the Ryzen 7 7800X3D has headroom up to 137 FPS. In this scenario, the GPU limits the CPU potential by 77% (FPS gap: 106 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 3050 6GB is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 8% | GPU Limits CPU 27% | GPU Limits CPU 11% | GPU Limits CPU 23% |
| 1440p (2K QHD) | GPU Limits CPU 36% | GPU Limits CPU 51% | GPU Limits CPU 41% | GPU Limits CPU 43% |
| 4K (Ultra HD) | GPU Limits CPU 69% | GPU Limits CPU 77% | GPU Limits CPU 75% | GPU Limits CPU 77% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 94% below recommended and your GPU is 35% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+94%vsrecommended
-35%vsrecommended
+478%vsminimum
+12%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 3050 6GB can run Baldur's Gate 3 smoothly up to 1440p achieving around 62 FPS at Ultra quality. Your GPU is 35% below the recommended specs, and your CPU is 94% above the recommended requirements.
This CPU + GPU combo costs approximately $563 ($384 CPU (Rank #212 Value) + $179 GPU (Rank #22 Value)). Your build is already very cost-efficient, but if you want even more FPS, the next good option is upgrading the GPU. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance.
For Baldur's Gate 3, upgrading the GPU would give you the most noticeable improvement. The GeForce RTX 3050 6GB is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Baldur's Gate 3 currently only supports AFMF (AMD Fluid Motion Frames) for frame generation, which is an AMD-exclusive technology. Because you are using an NVIDIA GPU, you cannot use Frame Generation for this specific game. However, the game does support DLSS Upscaling and FSR Upscaling, which you should enable to render at a lower resolution and use AI to significantly boost your FPS without losing visual quality.
Baldur's Gate 3 requires at minimum a Core i5-4690 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 150 GB (SSD) storage. For the recommended experience, you need a Core i7-8700K and GeForce RTX 2060 Super with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Baldur's Gate 3 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
