A masterpiece of the RAGE engine, heavily taxing the GPU with volumetric lighting and water physics. Interestingly, it has relatively low CPU utilization compared to its graphical demands. Be prepared for a massive 150GB install size.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 108 FPS. At 1440p, all settings exceed 91 FPS. At 4K, frame rates range from 53 to 84 FPS.
The GeForce RTX 3060 12GB is 67% above the recommended GPU (GeForce GTX 1060) for Red Dead Redemption 2. The Ryzen 7 7800X3D is 278% above the recommended CPU (Core i7-4770K).
The GeForce RTX 3060 12GB sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $724. At 1080p Ultra, this combo delivers 108 FPS, equivalent to 0.15 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.232 fps/$ | 0.203 fps/$ | 0.169 fps/$ | 0.149 fps/$ |
| 1440p | 0.180 fps/$ | 0.167 fps/$ | 0.152 fps/$ | 0.126 fps/$ |
| 4k | 0.116 fps/$ | 0.105 fps/$ | 0.087 fps/$ | 0.073 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p ultra, the GeForce RTX 3060 12GB sets the ceiling at about 88 FPS, while the Ryzen 7 7800X3D has headroom up to 122 FPS. In this scenario, the GPU limits the CPU potential by 28% (FPS gap: 34 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 3060 12GB is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 15% | GPU Limits CPU 12% | GPU Limits CPU 25% | GPU Limits CPU 27% |
| 1440p (2K QHD) | GPU Limits CPU 17% | GPU Limits CPU 12% | GPU Limits CPU 21% | GPU Limits CPU 28% |
| 4K (Ultra HD) | GPU Limits CPU 25% | GPU Limits CPU 22% | GPU Limits CPU 24% | GPU Limits CPU 25% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU52% - 75% <> GPU49% - 66% <> | CPU48% - 71% <> GPU83% - 97% <> | CPU32% - 57% <> GPU83% - 96% <> | CPU27% - 54% <> GPU90% - 100% <> |
| 1440p (2K QHD) | CPU29% - 53% <> GPU60% - 70% <> | CPU24% - 49% <> GPU91% - 100% <> | CPU24% - 48% <> GPU91% - 100% <> | CPU22% - 46% <> GPU93% - 100% <> |
| 4K (Ultra HD) | CPU26% - 41% <> GPU69% - 72% <> | CPU23% - 39% <> GPU98% - 100% <> | CPU23% - 38% <> GPU97% - 100% <> | CPU16% - 31% <> GPU98% - 100% <> |
The Ryzen 7 7800X3D + GeForce RTX 3060 12GB pairing runs this title with CPU utilization between 16% and 75% and GPU utilization between 49% and 100%. Ryzen 7 7800X3D stays in a controlled operating range, while GeForce RTX 3060 12GB carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 83% at 1080p to 92% at 4K, while CPU averages move from 52% to 30%.
From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) Medium, the GeForce RTX 3060 12GB averages 99% usage (98-100%), while the Ryzen 7 7800X3D stays at 31% (23-39%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 52% and GPU 83%. At 1440p, that shifts to CPU 37% and GPU 88%, and at 4K it reaches CPU 30% and GPU 92%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) Medium is the most balanced preset based on this dataset. It runs around CPU 60% (48-71%) and GPU 90% (83-97%), which keeps GeForce RTX 3060 12GB well utilized without constant max-out behavior while Ryzen 7 7800X3D remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The GeForce RTX 3060 12GB reaches 99% average load at 4K (Ultra HD) Medium while the Ryzen 7 7800X3D still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 278% above and your GPU is 67% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+278%vsrecommended
+67%vsrecommended
+728%vsminimum
+181%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 3060 12GB can run Red Dead Redemption 2 smoothly up to 1440p achieving around 91 FPS at Ultra quality. Your GPU is 67% above the recommended specs, and your CPU is 278% above the recommended requirements.
This CPU + GPU combo costs approximately $724 ($384 CPU (Rank #212 Value) + $340 GPU (Rank #52 Value)). Your GeForce RTX 3060 12GB is currently the main performance bottleneck and its market value ($340) is actually higher than newer, faster alternatives. Trading it or upgrading could yield immediate profit and performance gains. For example, upgrading to the GeForce RTX 5060 for around $299 (Rank #2 for value) could deliver noticeably better performance while costing less than your current GPU.
For Red Dead Redemption 2, upgrading the GPU would give you the most noticeable improvement. The GeForce RTX 3060 12GB is the limiting factor here, while the Ryzen 7 7800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Red Dead Redemption 2 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Red Dead Redemption 2 requires at minimum a Core i5-2500K (CPU) and GeForce GTX 770 (GPU) with 8 GB RAM and 150 GB storage. For the recommended experience, you need a Core i7-4770K and GeForce GTX 1060 with 12 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 3060 12GB both exceed the recommended specs, so you're well-positioned for a great experience.
These Red Dead Redemption 2 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
