Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 163 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 136 FPS. At 4K, all settings exceed 98 FPS.
The GeForce RTX 3080 Ti is 167% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Ryzen 7 7800X3D is 161% above the recommended CPU (Core i7-7700).
Naraka: Bladepoint supports: DLSS Frame Gen, FSR 3 Frame Gen, AFMF. The GeForce RTX 3080 Ti can use FSR 3 Frame Gen, providing up to 1.5x-2x frame rate boost.
The Ryzen 7 7800X3D sets the FPS ceiling at all 1080p settings, all 1440p settings, while the GeForce RTX 3080 Ti still has headroom. The FPS ceiling is closely matched at all 4k settings.
Approximated average price on current market:
Combo price: $934. At 1080p Ultra, this combo delivers 163 FPS, equivalent to 0.17 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.274 fps/$ | 0.228 fps/$ | 0.181 fps/$ | 0.175 fps/$ |
| 1440p | 0.217 fps/$ | 0.190 fps/$ | 0.156 fps/$ | 0.146 fps/$ |
| 4k | 0.154 fps/$ | 0.135 fps/$ | 0.113 fps/$ | 0.105 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p high, the Ryzen 7 7800X3D sets the ceiling at about 185 FPS, while the GeForce RTX 3080 Ti could reach 361 FPS. In this scenario, the CPU limits the GPU potential by 49% (FPS gap: 176 FPS). Overall distribution: CPU limits 8/12 cells, GPU limits 0/12, balanced 4/12.
Your Ryzen 7 7800X3D is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 3080 Ti rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 38% | CPU Limits GPU 45% | CPU Limits GPU 49% | CPU Limits GPU 44% |
| 1440p (2K QHD) | CPU Limits GPU 18% | CPU Limits GPU 26% | CPU Limits GPU 28% | CPU Limits GPU 21% |
| 4K (Ultra HD) | Balanced | Balanced | Balanced | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 161% above and your GPU is 167% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+161%vsrecommended
+167%vsrecommended
+598%vsminimum
+589%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 3080 Ti can run Naraka: Bladepoint smoothly up to 4k achieving around 98 FPS at Ultra quality. Your GPU is 167% above the recommended specs, and your CPU is 161% above the recommended requirements.
This CPU + GPU combo costs approximately $934 ($384 CPU (Rank #212 Value) + $550 GPU (Rank #72 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).
For Naraka: Bladepoint, upgrading the CPU would have the biggest impact on performance. The Ryzen 7 7800X3D is currently the limiting factor — the GeForce RTX 3080 Ti has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra.
Yes! Naraka: Bladepoint supports DLSS Frame Gen and FSR 3 Frame Gen and AFMF, and your GeForce RTX 3080 Ti is compatible with FSR 3 Frame Gen. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 3080 Ti both exceed the recommended specs, so you're well-positioned for a great experience.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
