Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 156 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 133 FPS. At 4K, all settings exceed 80 FPS.
The GeForce RTX 3080 is 149% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Ryzen 7 7800X3D is 161% above the recommended CPU (Core i7-7700).
Naraka: Bladepoint supports: DLSS Frame Gen, FSR 3 Frame Gen, AFMF. The GeForce RTX 3080 can use FSR 3 Frame Gen, providing up to 1.5x-2x frame rate boost.
At lower resolutions (all 1080p settings, all 1440p settings), the Ryzen 7 7800X3D sets the FPS ceiling. As graphical load increases at (all 4k settings), the GeForce RTX 3080 becomes the FPS-limiting side.
Approximated average price on current market:
Combo price: $784. At 1080p Ultra, this combo delivers 156 FPS, equivalent to 0.2 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.325 fps/$ | 0.269 fps/$ | 0.214 fps/$ | 0.199 fps/$ |
| 1440p | 0.260 fps/$ | 0.227 fps/$ | 0.185 fps/$ | 0.170 fps/$ |
| 4k | 0.156 fps/$ | 0.135 fps/$ | 0.110 fps/$ | 0.102 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p high, the Ryzen 7 7800X3D sets the ceiling at about 185 FPS, while the GeForce RTX 3080 could reach 349 FPS. In this scenario, the CPU limits the GPU potential by 47% (FPS gap: 164 FPS). Overall distribution: CPU limits 8/12 cells, GPU limits 4/12, balanced 0/12.
Your Ryzen 7 7800X3D is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 3080 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 38% | CPU Limits GPU 43% | CPU Limits GPU 47% | CPU Limits GPU 41% |
| 1440p (2K QHD) | CPU Limits GPU 19% | CPU Limits GPU 26% | CPU Limits GPU 27% | CPU Limits GPU 19% |
| 4K (Ultra HD) | GPU Limits CPU 20% | GPU Limits CPU 18% | GPU Limits CPU 20% | GPU Limits CPU 22% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 161% above and your GPU is 149% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+161%vsrecommended
+149%vsrecommended
+598%vsminimum
+543%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 3080 can run Naraka: Bladepoint smoothly up to 4k achieving around 80 FPS at Ultra quality. Your GPU is 149% above the recommended specs, and your CPU is 161% above the recommended requirements.
This CPU + GPU combo costs approximately $784 ($384 CPU (Rank #212 Value) + $400 GPU (Rank #47 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).
For Naraka: Bladepoint, upgrading the CPU would have the biggest impact on performance. The Ryzen 7 7800X3D is currently the limiting factor — the GeForce RTX 3080 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra. GPU fully utilized at: 4k high, 4k low, 4k medium, 4k ultra.
Yes! Naraka: Bladepoint supports DLSS Frame Gen and FSR 3 Frame Gen and AFMF, and your GeForce RTX 3080 is compatible with FSR 3 Frame Gen. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 3080 both exceed the recommended specs, so you're well-positioned for a great experience.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
