Bethesda's Creation Engine 2 is CPU-dependent, especially in cities, and requires an SSD for asset streaming. Optimization tends to favor AMD slightly, but generally requires powerful hardware to run smoothly.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 116 FPS. At 1440p, all settings exceed 115 FPS. At 4K, all settings exceed 72 FPS.
The GeForce RTX 3090 Ti is 18% above the recommended GPU (GeForce RTX 2080) for Starfield. The Ryzen 7 7800X3D is 89% above the recommended CPU (Core i5-10600K).
Starfield supports: FSR 3 Frame Gen, AFMF. The GeForce RTX 3090 Ti can use FSR 3 Frame Gen, providing up to 1.5x-2x frame rate boost.
The GeForce RTX 3090 Ti sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 7800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $1484. At 1080p Ultra, this combo delivers 116 FPS, equivalent to 0.08 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.120 fps/$ | 0.106 fps/$ | 0.091 fps/$ | 0.078 fps/$ |
| 1440p | 0.117 fps/$ | 0.110 fps/$ | 0.094 fps/$ | 0.077 fps/$ |
| 4k | 0.073 fps/$ | 0.070 fps/$ | 0.059 fps/$ | 0.049 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p ultra, the GeForce RTX 3090 Ti sets the ceiling at about 94 FPS, while the Ryzen 7 7800X3D has headroom up to 156 FPS. In this scenario, the GPU limits the CPU potential by 40% (FPS gap: 62 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 3090 Ti is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 7800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 18% | GPU Limits CPU 27% | GPU Limits CPU 29% | GPU Limits CPU 33% |
| 1440p (2K QHD) | GPU Limits CPU 25% | GPU Limits CPU 33% | GPU Limits CPU 36% | GPU Limits CPU 40% |
| 4K (Ultra HD) | GPU Limits CPU 15% | GPU Limits CPU 19% | GPU Limits CPU 21% | GPU Limits CPU 27% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 89% above and your GPU is 18% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+89%vsrecommended
+18%vsrecommended
+147%vsminimum
+100%vsminimum
Yes, the Ryzen 7 7800X3D paired with the GeForce RTX 3090 Ti can run Starfield smoothly up to 4k achieving around 72 FPS at Ultra quality. Your GPU is 18% above the recommended specs, and your CPU is 89% above the recommended requirements.
This CPU + GPU combo costs approximately $1484 ($384 CPU (Rank #212 Value) + $1100 GPU (Rank #78 Value)). Your GeForce RTX 3090 Ti provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating. For example, upgrading to the GeForce RTX 5090 for around $1999 (Rank #80 for value) could deliver noticeably better performance.
Your GeForce RTX 3090 Ti is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Starfield performance right now. GPU fully utilized at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! Starfield supports FSR 3 Frame Gen and AFMF, and your GeForce RTX 3090 Ti is compatible with FSR 3 Frame Gen. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Starfield requires at minimum a Core i7-6800K (CPU) and GeForce GTX 1070 Ti (GPU) with 16 GB RAM and 125 GB (SSD Obrigatório) storage. For the recommended experience, you need a Core i5-10600K and GeForce RTX 2080 with 16 GB RAM. Your Ryzen 7 7800X3D and GeForce RTX 3090 Ti both exceed the recommended specs, so you're well-positioned for a great experience.
These Starfield FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
